Step-by-step Installation of a 3.2l Paxton Roots Supercharger on a Mustang Gt

by

The Mustang GT is known for its impressive performance, but for those looking to take it to the next level, installing a supercharger can provide the extra horsepower and torque needed for an exhilarating driving experience. This guide will walk you through the step-by-step installation of a 3.2L Paxton Roots supercharger on a Mustang GT.

Tools and Materials Needed

  • 3.2L Paxton Roots Supercharger Kit
  • Basic hand tools (wrenches, sockets, screwdrivers)
  • Torque wrench
  • Ratcheting straps
  • Engine oil
  • Coolant
  • Shop towels
  • Safety glasses and gloves

Preparation Steps

Before starting the installation, it’s crucial to prepare your workspace and gather all necessary tools and materials. Here are the steps to follow:

  • Ensure the vehicle is parked on a flat surface.
  • Disconnect the battery to prevent any electrical issues.
  • Remove the engine cover and any components that obstruct access to the engine.

Removing the Stock Components

Begin by removing the factory components that will be replaced by the supercharger. This includes:

  • Intake manifold
  • Throttle body
  • Stock air intake system

Installing the Supercharger Bracket

Once the stock components are removed, it’s time to install the supercharger bracket. Follow these steps:

  • Position the supercharger bracket onto the engine.
  • Align the bracket with the mounting holes.
  • Secure the bracket using the provided bolts and a torque wrench.

Mounting the Supercharger

With the bracket in place, you can now mount the supercharger:

  • Carefully lift the supercharger and place it onto the bracket.
  • Align the supercharger with the bracket holes.
  • Secure the supercharger using the provided hardware.

Connecting the Intake and Throttle Body

Next, connect the intake system and throttle body to the supercharger:

  • Install the throttle body onto the supercharger.
  • Attach the intake tubing from the supercharger to the air filter.
  • Ensure all clamps are tight and secure.

Installing the Intercooler (if applicable)

If your supercharger kit includes an intercooler, follow these steps to install it:

  • Locate the mounting points for the intercooler.
  • Secure the intercooler using the provided brackets and bolts.
  • Connect the intercooler piping from the supercharger to the intercooler.

Final Connections and Fluid Checks

After all components are installed, check all connections:

  • Ensure all hoses and clamps are secure.
  • Check fluid levels and top off engine oil and coolant as necessary.
  • Reconnect the battery.

Testing the Installation

Before taking your Mustang GT for a spin, it’s vital to test the installation:

  • Start the engine and let it idle for a few minutes.
  • Listen for any unusual noises or leaks.
  • Take the vehicle for a short drive to ensure everything is functioning properly.

Conclusion

Installing a 3.2L Paxton Roots supercharger on your Mustang GT can significantly enhance its performance. By following these steps carefully, you can achieve a successful installation and enjoy the benefits of added horsepower and torque. Always remember to consult the manufacturer’s instructions and seek professional help if needed.