Table of Contents
The Akrapovic Evolution Line 3.5-inch Turbo-back Exhaust is a popular upgrade for Lamborghini Huracan owners seeking enhanced performance and sound. This article provides a comprehensive step-by-step guide for the installation process.
Tools and Materials Needed
- Akrapovic Evolution Line 3.5-inch Turbo-back Exhaust Kit
- Socket set (including 10mm, 13mm, and 15mm sockets)
- Torque wrench
- Jack and jack stands
- Safety glasses
- Gloves
- Cutting tool (if necessary)
- Heat-resistant spray (optional)
Preparation
Before starting the installation, ensure that the car is parked on a level surface and the engine is cool. Gather all necessary tools and materials to avoid interruptions during the process.
Step 1: Lift the Vehicle
Using the jack, lift the Lamborghini Huracan and secure it with jack stands. Ensure the vehicle is stable before proceeding.
Step 2: Remove the Stock Exhaust
Locate the stock exhaust system under the car. Use the socket set to remove the bolts securing the exhaust to the turbochargers and the rear muffler.
Carefully disconnect any hangers or brackets holding the exhaust in place. If necessary, use a cutting tool to remove any sections that are difficult to detach.
Step 3: Prepare the Akrapovic Exhaust
Unbox the Akrapovic Evolution Line exhaust system and lay out all components. Check for any damages or missing parts before installation.
Step 4: Install the New Exhaust
Begin by attaching the new exhaust pipes to the turbochargers. Ensure that all gaskets are in place to prevent leaks. Use the appropriate bolts and tighten them to the manufacturer’s specifications using a torque wrench.
Next, connect the rear muffler section to the exhaust pipes. Make sure all hangers are securely fastened to avoid rattling during operation.
Step 5: Check Alignment and Secure Connections
Once the exhaust is in place, check the alignment of the exhaust tips to ensure they are centered and even. Adjust as necessary and tighten all bolts securely.
Step 6: Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Remove the jack stands and ensure the car is stable.
Step 7: Test the Exhaust System
Start the engine and listen for any unusual noises. Inspect the exhaust system for leaks or misalignments. If everything sounds and looks good, you have successfully installed the Akrapovic exhaust.
Conclusion
The installation of the Akrapovic Evolution Line 3.5-inch Turbo-back Exhaust on a Lamborghini Huracan can enhance both performance and sound. Following these steps carefully will ensure a successful installation.