Table of Contents
The Chevy SS LS3 is a powerful vehicle, and upgrading to a Corsa Sport Exhaust can enhance its performance and sound. In this guide, we will take you through the step-by-step installation process of a Corsa Sport Exhaust on your Chevy SS LS3.
Tools and Materials Needed
- Corsa Sport Exhaust System
- Socket set
- Ratchet
- Torque wrench
- Jack and jack stands
- Safety glasses
- Gloves
- WD-40 or penetrating oil
Preparation
Before you start the installation, ensure that your vehicle is parked on a flat surface and the engine is cool. Gather all the tools and materials you will need for the installation.
Step 1: Lifting the Vehicle
Using a jack, lift the rear of the vehicle and secure it with jack stands. Make sure the vehicle is stable before proceeding.
Step 2: Removing the Stock Exhaust
Start by applying WD-40 or penetrating oil to the exhaust hangers and clamps to make removal easier. Allow it to sit for a few minutes.
Using a socket set, remove the bolts securing the exhaust to the headers and the clamps holding the exhaust in place. Carefully detach the exhaust hangers from the rubber mounts.
Step 3: Installing the Corsa Sport Exhaust
Begin by attaching the Corsa Sport Exhaust components in the reverse order of removal. Start with the mid-pipe, ensuring it is aligned properly with the headers.
Secure the mid-pipe using the provided clamps and bolts, but do not fully tighten them yet. This will allow for adjustments.
Next, install the rear section of the exhaust. Attach it to the mid-pipe and secure it with clamps, making sure the exhaust tips are centered.
Step 4: Adjusting and Tightening
Once all components are in place, adjust the positioning of the exhaust to ensure there is adequate clearance from the rear axle and suspension components.
Using a torque wrench, tighten all bolts and clamps to the manufacturer’s specifications. This ensures that everything is secure and prevents any exhaust leaks.
Step 5: Final Checks
Before lowering the vehicle, double-check all connections and make sure everything is tight. Inspect the exhaust for any signs of misalignment.
Step 6: Lowering the Vehicle
Carefully lower the vehicle back to the ground using the jack. Remove the jack stands and ensure everything is clear before driving.
Step 7: Testing the Exhaust
Start the engine and listen for any unusual sounds. Check for exhaust leaks and ensure that the exhaust is functioning properly.
Conclusion
Installing a Corsa Sport Exhaust on your Chevy SS LS3 can significantly improve its performance and sound. By following these steps, you can ensure a successful installation and enjoy the benefits of your new exhaust system.