Table of Contents
The Dodge Stealth is known for its impressive performance, but if you’re looking to take it to the next level, installing a nitrous oxide kit can provide instant power gains. This guide will walk you through the step-by-step installation process for a nitrous oxide kit on your Dodge Stealth.
What You Will Need
- Nitrous oxide kit
- Basic hand tools (wrenches, screwdrivers, etc.)
- Drill and drill bits
- Safety glasses
- Fuel line and connectors
- Electrical tape
- Wire connectors
- Vacuum hose
Safety Precautions
Before starting the installation, it is crucial to take safety precautions. Always wear safety glasses and gloves when working with tools and chemicals. Ensure you are in a well-ventilated area, and do not smoke or have open flames nearby.
Step 1: Prepare Your Vehicle
Begin by parking your Dodge Stealth on a flat surface and disconnecting the battery. This will prevent any electrical issues during the installation process. Make sure the engine is cool before proceeding.
Step 2: Install the Nitrous Oxide Bottle
Choose a suitable location for the nitrous oxide bottle in the trunk or rear of the vehicle. Secure it using the provided brackets and ensure it is upright. Use a drill to make holes if necessary, and be sure to check for any obstructions.
Step 3: Route the Nitrous Lines
Carefully route the nitrous lines from the bottle to the engine bay. Avoid sharp edges and hot surfaces that could damage the lines. Use zip ties to secure the lines along the way, ensuring they do not interfere with any moving parts.
Step 4: Install the Nitrous Solenoid
Mount the nitrous solenoid in a location that is easily accessible. Connect the nitrous line from the bottle to the input of the solenoid. The output of the solenoid should be connected to the intake manifold or throttle body. Use Teflon tape on the threads to prevent leaks.
Step 5: Connect the Electrical Wiring
Connect the electrical wiring from the nitrous solenoid to the activation switch. Ensure all connections are secure and insulated with electrical tape. It is recommended to connect the switch to the dashboard for easy access while driving.
Step 6: Install the Fuel Line
Install the fuel line from the fuel system to the nitrous solenoid. This line will provide the necessary fuel to mix with the nitrous oxide. Use appropriate connectors and clamps to secure the line and prevent leaks.
Step 7: Test for Leaks
Before starting the engine, it is crucial to test for any leaks in the nitrous and fuel lines. Use a spray bottle filled with soapy water to check for bubbles at the connection points. Tighten any loose connections as necessary.
Step 8: Reconnect the Battery and Start the Engine
Once you have confirmed that there are no leaks, reconnect the battery. Start the engine and let it idle for a few minutes to ensure everything is functioning properly. Check for any unusual sounds or issues.
Step 9: Test the Nitrous System
With the engine running smoothly, it’s time to test the nitrous system. Engage the activation switch and monitor the engine’s performance. Make sure the system activates as expected and that the engine responds positively to the added power.
Final Thoughts
Installing a nitrous oxide kit on your Dodge Stealth can significantly enhance its performance. By following these steps carefully, you can achieve instant power gains while ensuring safety and reliability. Always remember to use nitrous responsibly and enjoy the thrill of driving your enhanced vehicle.