Step-by-step Installation of a Precision 20-inch Intercooler on a Ford Ecoboost: Boost Your Power and Reliability

by

Upgrading your Ford EcoBoost with a Precision 20-inch intercooler can significantly enhance engine performance and reliability. This guide will walk you through the installation process step-by-step, ensuring you achieve optimal results.

Tools and Materials Needed

  • Precision 20-inch intercooler kit
  • Socket set
  • Wrenches
  • Flathead screwdriver
  • Phillips screwdriver
  • Torque wrench
  • Hoses and clamps (if not included)
  • Coolant (if necessary)
  • Safety glasses
  • Gloves

Preparation

Before starting the installation, ensure your vehicle is parked on a flat surface and the engine is cool. Gather all necessary tools and materials to streamline the process.

Step 1: Remove the Front Bumper

Begin by removing the front bumper to access the intercooler. Follow these steps:

  • Locate and remove the screws and clips securing the bumper.
  • Detach any wiring harnesses connected to the bumper.
  • Carefully pull the bumper away from the vehicle.

Step 2: Remove the Stock Intercooler

With the bumper removed, you can now access the stock intercooler. Follow these instructions:

  • Disconnect the inlet and outlet hoses from the stock intercooler.
  • Unbolt the intercooler from its mounting brackets.
  • Carefully remove the stock intercooler from the engine bay.

Step 3: Install the Precision Intercooler

Now it’s time to install the Precision 20-inch intercooler. Follow these steps:

  • Position the new intercooler in the mounting location.
  • Secure the intercooler with the provided bolts.
  • Reconnect the inlet and outlet hoses to the new intercooler.

Step 4: Reattach the Front Bumper

With the intercooler installed, you can now reattach the front bumper. Follow these steps:

  • Align the bumper with the mounting points on the vehicle.
  • Reconnect any wiring harnesses that were detached.
  • Secure the bumper with screws and clips.

Step 5: Check for Leaks and Test Drive

After reassembling everything, it’s crucial to check for any leaks. Follow these steps:

  • Start the engine and let it idle for a few minutes.
  • Inspect the intercooler and hoses for any signs of leakage.
  • Take the vehicle for a test drive to ensure everything is functioning correctly.

Conclusion

Installing a Precision 20-inch intercooler on your Ford EcoBoost can greatly improve your vehicle’s performance and reliability. By following these steps, you can ensure a successful installation and enjoy the benefits of enhanced power.