Table of Contents
The Hyundai Veloster N has gained a reputation for its sporty performance and engaging driving experience. However, for those looking to push the limits further, installing a SP Turbo Kit can elevate the power output to over 370 horsepower. This guide provides a comprehensive step-by-step installation process to enhance your Veloster N’s performance and responsiveness.
Tools and Materials Needed
- SP Turbo Kit
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Intercooler piping kit
- Boost gauge
- Vacuum line
- Oil catch can
- Heat-resistant gloves
- Safety glasses
Preparation
Before starting the installation, ensure that you have all the necessary tools and materials ready. It is also crucial to work in a well-ventilated area and wear appropriate safety gear, including gloves and safety glasses.
Step 1: Disconnect the Battery
Begin by disconnecting the negative terminal of the battery to prevent any electrical shorts during the installation process.
Step 2: Remove the Stock Turbo
To access the stock turbo, remove the engine cover and the intake manifold. Carefully disconnect all related hoses and electrical connectors. Use the socket set to unbolt the turbocharger from the exhaust manifold and lift it out of the engine bay.
Step 3: Install the SP Turbo Kit
Position the new SP Turbo Kit in place and secure it to the exhaust manifold using the provided hardware. Ensure that all gaskets are properly seated to prevent leaks.
Step 4: Connect Intercooler Piping
Install the intercooler piping kit according to the manufacturer’s instructions. This may involve routing new pipes and connecting them to the turbo and intercooler. Make sure all connections are tight and secure.
Step 5: Attach the Boost Gauge
Install the boost gauge in a visible location within the cabin. Connect the vacuum line from the turbo to the gauge, ensuring a secure fit to monitor boost levels accurately.
Step 6: Install the Oil Catch Can
Position the oil catch can in a suitable location in the engine bay. Connect the necessary hoses from the PCV system to the catch can to manage oil vapor effectively.
Step 7: Reassemble Engine Components
Reinstall the intake manifold and engine cover, ensuring all bolts are tightened to the manufacturer’s specifications. Double-check that all hoses and connectors are securely attached.
Final Steps
Step 8: Reconnect the Battery
Reconnect the negative terminal of the battery and ensure that all electrical connections are secure.
Step 9: Start the Engine
Start the engine and allow it to idle for a few minutes. Check for any leaks or abnormal sounds. Monitor the boost gauge to ensure proper operation.
Step 10: Test Drive
Take the Veloster N for a test drive to experience the enhanced power and responsiveness. Pay attention to the boost levels and overall performance during various driving conditions.
Conclusion
Installing a SP Turbo Kit on your Veloster N can significantly enhance its performance, providing an exhilarating driving experience with over 370 horsepower. By following this step-by-step guide, you can successfully complete the installation and enjoy the benefits of increased power and responsiveness.