Table of Contents
Installing the Active Autowerke Supercharger Kit on your M3 F80 can significantly enhance your vehicle’s performance. This guide provides a detailed, step-by-step approach to ensure a successful installation. Before you begin, make sure you have all the necessary tools and components ready.
Tools and Materials Required
- Active Autowerke Supercharger Kit
- Socket set
- Torque wrench
- Screwdrivers (flathead and Phillips)
- Wrenches
- Drill with bits
- Vacuum line
- Coolant
- Engine oil
- Safety glasses
- Gloves
Preparation Steps
Before starting the installation, ensure your M3 F80 is parked on a flat surface and the engine is cool. Gather all tools and materials listed above. It is advisable to wear safety glasses and gloves throughout the process.
Disconnect the Battery
Begin by disconnecting the negative terminal of the battery. This step is crucial to prevent any electrical shorts during the installation.
Remove the Engine Cover
Using your socket set, remove the bolts securing the engine cover. Carefully lift the cover off and set it aside.
Installing the Supercharger Kit
Remove the Stock Intake System
Loosen the clamps on the stock intake and remove the intake system. Be cautious not to damage any surrounding components.
Install the Supercharger Bracket
Position the supercharger bracket onto the engine. Align it with the existing holes and secure it using the provided bolts. Ensure it is tightened to the specified torque settings.
Mount the Supercharger
Attach the supercharger to the bracket. Make sure it is firmly secured and check for any obstructions that may interfere with its function.
Connect the Intake Piping
Install the intake piping that comes with the supercharger kit. Ensure all clamps are tight and the piping is properly routed away from hot engine components.
Install the Intercooler
Position the intercooler in front of the radiator. Secure it with the provided mounting hardware and ensure it is aligned properly for optimal airflow.
Connecting the Electrical Components
Next, you will need to connect the electrical components of the supercharger. This includes the wiring harness and any sensors that may be part of the kit.
Connect the Wiring Harness
Locate the wiring harness provided in the kit. Connect it to the supercharger and ensure all connections are secure. Refer to the wiring diagram included in the kit for specific instructions.
Install the Fuel Pump Upgrade
If your kit includes a fuel pump upgrade, install it according to the manufacturer’s instructions. This step is essential for ensuring your engine receives adequate fuel supply.
Final Steps
After all components are installed, it’s time to reassemble and check everything. Ensure all bolts are tightened and there are no loose connections.
Reconnect the Battery
Reconnect the negative terminal of the battery. Make sure it is secured properly to avoid any electrical issues.
Check for Leaks
Start the engine and allow it to idle. Check for any leaks around the supercharger and intercooler. If you notice any leaks, turn off the engine and address them before proceeding.
Test Drive
Once you have confirmed there are no leaks, take your M3 F80 for a test drive. Pay attention to the performance and ensure everything is functioning as expected.
Conclusion
Installing the Active Autowerke Supercharger Kit on your M3 F80 can be a rewarding project that enhances your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of increased power and responsiveness.