Table of Contents
The Mitsubishi Eclipse is a popular choice among car enthusiasts, particularly for those looking to enhance performance. One effective way to improve engine efficiency is by installing an aftermarket intercooler. This article provides a detailed, step-by-step guide on how to install an aftermarket intercooler on your Mitsubishi Eclipse for better charge cooling.
Tools and Materials Needed
- Aftermarket intercooler kit
- Socket set
- Wrenches
- Hose clamps
- Silicone couplers
- Intercooler piping
- Drill and drill bits
- Measuring tape
- Safety glasses
- Gloves
Preparation Steps
Before starting the installation, ensure that you have all the necessary tools and materials. It’s also important to work in a well-ventilated area and wear safety gear.
1. Disconnect the Battery
Begin by disconnecting the negative terminal of the battery to prevent any electrical shorts during the installation process.
2. Remove the Front Bumper
Next, remove the front bumper of your Mitsubishi Eclipse. This usually involves unscrewing several bolts and clips. Carefully detach the bumper to avoid damaging any components.
3. Take Out the Stock Intercooler
Locate the stock intercooler and remove it by disconnecting the piping and any mounting brackets. Be cautious while removing the stock components to prevent any damage to surrounding parts.
Installing the Aftermarket Intercooler
4. Position the New Intercooler
Place the aftermarket intercooler in the same position as the stock intercooler. Make sure it fits securely and aligns with the mounting points.
5. Secure the Intercooler
Using the provided brackets and bolts, secure the new intercooler in place. Ensure that it is tightly fastened to avoid any movement while driving.
6. Install Intercooler Piping
Attach the intercooler piping to the new intercooler. Use silicone couplers and hose clamps to ensure a tight seal. Make sure the piping is routed away from any moving parts or heat sources.
7. Connect the Charge Piping
Connect the charge piping from the turbocharger to the intercooler. Ensure that all connections are secure and free from leaks.
Final Steps
8. Reinstall the Front Bumper
Once the intercooler and piping are securely installed, carefully reattach the front bumper. Make sure all clips and screws are fastened properly.
9. Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure that it is tightly secured.
10. Test the Installation
Start the engine and check for any leaks in the intercooler system. Take the car for a short test drive to ensure everything is functioning properly.
Conclusion
Installing an aftermarket intercooler on your Mitsubishi Eclipse can greatly enhance engine performance by improving charge cooling. By following these steps, you can ensure a successful installation and enjoy the benefits of increased efficiency and power.