Table of Contents
The Edelbrock E-Force Supercharger is a popular upgrade for Dodge Challenger owners looking to boost their vehicle’s horsepower significantly. This guide will walk you through the step-by-step installation process to help you achieve over 550 horsepower.
Tools and Materials Needed
- Edelbrock E-Force Supercharger Kit
- Socket set
- Torque wrench
- Ratchet and extensions
- Flathead and Phillips screwdrivers
- Wire cutters and strippers
- Engine oil
- Coolant
- Shop towels
- Safety glasses
Preparation Before Installation
Before beginning the installation, ensure that you have all the necessary tools and materials at hand. Also, make sure your vehicle is parked on a flat surface and the engine is cool.
Disconnect the Battery
Start by disconnecting the negative terminal of the battery to prevent any electrical issues during the installation process.
Remove the Engine Cover
Next, remove the engine cover by unscrewing the bolts that secure it in place. Set the cover aside in a safe location.
Removing the Stock Components
To install the Edelbrock E-Force Supercharger, you need to remove several stock components from your Challenger.
Remove the Intake Manifold
Carefully detach the intake manifold by unscrewing the bolts and disconnecting any hoses or electrical connections. Keep track of all the components for reinstallation.
Remove the Throttle Body
Next, disconnect the throttle body from the intake manifold. Ensure that you remove any sensors or connectors attached to it.
Remove the Stock Supercharger (if applicable)
If your Challenger is already equipped with a stock supercharger, remove it by following the manufacturer’s instructions. Make sure to disconnect all associated wiring and hoses.
Installing the Edelbrock E-Force Supercharger
With the stock components removed, you can now proceed to install the Edelbrock E-Force Supercharger.
Install the Supercharger Base Plate
Begin by placing the supercharger base plate onto the engine. Secure it with the provided bolts, ensuring to follow the torque specifications outlined in the installation manual.
Attach the Supercharger Unit
Carefully position the supercharger unit onto the base plate and secure it with the necessary hardware. Ensure all gaskets are seated properly to prevent leaks.
Reconnect the Throttle Body
Reattach the throttle body to the supercharger. Make sure to reconnect any sensors or connectors that were previously removed.
Reassembly and Final Steps
After the supercharger is installed, it’s time to reassemble the components you removed earlier.
Reinstall the Intake Manifold
Place the intake manifold back onto the engine and secure it with the bolts, following the torque specifications. Reconnect any hoses or electrical connections.
Replace the Engine Cover
Once everything is reconnected, replace the engine cover and secure it with the bolts.
Reconnect the Battery
Reconnect the negative terminal of the battery to complete the installation process.
Testing the Installation
Before taking your Challenger for a drive, it’s essential to test the installation to ensure everything is functioning correctly.
Check for Leaks
Start the engine and visually inspect for any fluid leaks around the supercharger and intake manifold.
Monitor Engine Performance
Take the vehicle for a short drive, monitoring the engine performance and ensuring the supercharger is operating as expected.
Conclusion
The installation of the Edelbrock E-Force Supercharger on your Dodge Challenger can significantly enhance its performance, providing over 550 horsepower. By following this step-by-step guide, you can ensure a successful installation and enjoy the thrilling power boost that comes with it.