Table of Contents
The Eibach Pro-Kit springs are a popular choice for enhancing the stance and handling of the Porsche Cayenne Turbo. This article provides a comprehensive, step-by-step guide to installing these springs, ensuring a smoother ride and improved aesthetics.
Tools and Materials Required
- Socket set
- Wrench set
- Spring compressor
- Jack and jack stands
- Torque wrench
- Eibach Pro-Kit Springs
- Safety glasses
- Gloves
Preparation
Before starting the installation, ensure you have all necessary tools and materials ready. Work in a well-ventilated area and wear safety glasses and gloves for protection.
Step 1: Lift the Vehicle
Using a jack, lift the front of the Cayenne Turbo and secure it with jack stands. Make sure the vehicle is stable before proceeding.
Step 2: Remove the Wheels
Loosen the lug nuts on the front wheels using a wrench. Remove the wheels completely to access the suspension components.
Step 3: Remove the Strut Assembly
Locate the strut assembly and remove the bolts securing it to the hub and the upper mount. Carefully detach the strut from the vehicle.
Step 4: Compress the Springs
Using a spring compressor, carefully compress the coil spring on the strut assembly. This step is crucial to safely remove the spring from the strut.
Step 5: Remove the Old Springs
Once the spring is compressed, remove the top nut of the strut and detach the spring. Carefully release the spring compressor to remove the old spring.
Step 6: Install the Eibach Pro-Kit Springs
Place the new Eibach Pro-Kit spring onto the strut assembly. Ensure it is seated correctly before reattaching the top nut. Tighten the nut to the manufacturer’s specifications.
Step 7: Reinstall the Strut Assembly
Reattach the strut assembly to the hub and upper mount. Secure it with the bolts you removed earlier, ensuring everything is tightened to the proper torque specifications.
Step 8: Repeat for the Other Side
Follow the same steps to remove and replace the springs on the other side of the vehicle. Consistency is key for balanced handling.
Final Steps
Step 9: Reinstall the Wheels
Once both sides have been completed, reinstall the wheels and hand-tighten the lug nuts.
Step 10: Lower the Vehicle
Carefully lower the vehicle back to the ground using the jack. Once on the ground, use the torque wrench to tighten the lug nuts to the specified torque.
Step 11: Test Drive
After installation, take the Cayenne Turbo for a test drive. Pay attention to the handling and stability, ensuring everything feels right.
Conclusion
The installation of Eibach Pro-Kit springs on your Porsche Cayenne Turbo can significantly enhance its stance and performance. By following these steps carefully, you can achieve a professional result and enjoy the benefits of improved handling and aesthetics.