Table of Contents
Installing Flowmaster High Flow Catalytic Converters on a Dodge Charger R/T can enhance your vehicle’s performance and efficiency. This guide will provide a detailed, step-by-step process to ensure a successful installation.
Tools and Materials Needed
- Flowmaster High Flow Catalytic Converters
- Socket set
- Wrench set
- Jack and jack stands
- Safety glasses
- Gloves
- Exhaust pipe cutter or sawzall
- New exhaust gaskets
- Anti-seize compound
Preparation Steps
Before starting the installation, it’s essential to prepare your workspace and vehicle. Follow these steps:
- Ensure the vehicle is parked on a flat surface.
- Engage the parking brake.
- Put on safety glasses and gloves.
- Lift the vehicle using a jack and secure it with jack stands.
Removing the Old Catalytic Converters
Follow these steps to remove the existing catalytic converters:
- Locate the catalytic converters along the exhaust system.
- Using a socket set, remove the bolts securing the catalytic converters to the exhaust pipe.
- Cut the exhaust pipes if necessary using an exhaust pipe cutter or sawzall.
- Carefully remove the old catalytic converters from the exhaust system.
- Inspect the exhaust system for any damage or wear.
Installing the Flowmaster High Flow Catalytic Converters
Now that the old converters are removed, it’s time to install the new Flowmaster High Flow Catalytic Converters. Follow these steps:
- Position the new catalytic converters in place.
- Apply anti-seize compound to the threads of the new bolts.
- Secure the catalytic converters to the exhaust pipes using the new bolts and gaskets.
- Ensure all connections are tight and secure.
Reconnecting the Exhaust System
After installing the new catalytic converters, you will need to reconnect the exhaust system:
- Reconnect any exhaust pipes that were disconnected or cut.
- Ensure all joints are properly sealed with gaskets.
- Tighten all bolts to the manufacturer’s specifications.
Final Steps and Testing
Once the installation is complete, follow these final steps:
- Lower the vehicle from the jack stands.
- Start the engine and listen for any unusual noises.
- Check for leaks around the new catalytic converters.
- Take the vehicle for a test drive to ensure everything is functioning correctly.
Conclusion
Installing Flowmaster High Flow Catalytic Converters on a Dodge Charger R/T can significantly improve exhaust flow and overall performance. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your upgraded exhaust system.