Table of Contents
The JWT Power Pulley Kit is a popular modification for Nissan 370Z enthusiasts looking to enhance performance. In this article, we will guide you through the step-by-step installation process of the JWT Power Pulley Kit, as well as discuss the associated costs and benefits.
Understanding the JWT Power Pulley Kit
The JWT Power Pulley Kit is designed to reduce parasitic drag on the engine, allowing it to spin more freely. This results in improved horsepower and torque output. The kit typically includes lightweight pulleys and belts that replace the factory components.
Tools and Materials Needed
- JWT Power Pulley Kit
- Socket set (including deep sockets)
- Torque wrench
- Ratchet and extensions
- Breaker bar
- Engine oil
- Shop towels
- Safety glasses
Installation Steps
Step 1: Preparation
Before starting the installation, ensure the vehicle is parked on a flat surface, and the engine is cool. Disconnect the negative battery terminal to prevent any electrical issues during the process.
Step 2: Remove the Engine Cover
Using a socket set, remove the bolts securing the engine cover. Carefully lift the cover off and set it aside, exposing the engine components.
Step 3: Remove the Factory Pulleys
Using a breaker bar, loosen and remove the factory pulleys. Be cautious as some bolts may be tight. Keep track of any washers or spacers that may be present.
Step 4: Install the JWT Pulleys
Take the JWT pulleys and install them in the same positions as the factory pulleys. Ensure they are seated properly and align with the belt paths.
Step 5: Reattach the Belts
Reattach the belts to the new pulleys, ensuring they are tight and properly aligned. If necessary, adjust the tensioners to accommodate the new setup.
Step 6: Reinstall the Engine Cover
Once everything is installed and secured, place the engine cover back onto the engine and tighten the bolts to secure it.
Step 7: Reconnect the Battery
Reconnect the negative battery terminal. Start the engine and check for any unusual noises or issues. Allow the engine to idle for a few minutes.
Costs Associated with the Installation
The cost of the JWT Power Pulley Kit can vary based on the supplier, but generally, you can expect to pay between $300 and $500. Additionally, consider the following costs:
- Labor costs (if you hire a professional): $100 – $200
- Tools (if not already owned): $50 – $150
- Miscellaneous supplies (oil, shop towels): $20
Benefits of Installing the JWT Power Pulley Kit
Installing the JWT Power Pulley Kit offers several benefits, including:
- Increased Horsepower: Reducing parasitic drag allows the engine to produce more power.
- Improved Torque: Enhanced torque output can lead to better acceleration.
- Better Fuel Efficiency: A more efficient engine can result in improved fuel economy.
- Enhanced Engine Response: The engine may feel more responsive and lively.
Conclusion
The installation of the JWT Power Pulley Kit on your Nissan 370Z can significantly enhance your vehicle’s performance. By following the outlined steps, you can achieve improved horsepower and torque while also enjoying the benefits of better fuel efficiency. Whether you choose to install the kit yourself or hire a professional, the investment can lead to a more exhilarating driving experience.