Table of Contents
The installation of a Milltek Sport Cat-back exhaust on a W213 E63 can significantly enhance the vehicle’s performance and sound. This guide provides a step-by-step approach to ensure a smooth installation process.
Tools and Materials Needed
- Milltek Sport Cat-back Exhaust Kit
- Socket Set
- Wrench Set
- Jack and Jack Stands
- Safety Glasses
- Gloves
- Exhaust Hanger Tool
Preparation
Before starting the installation, ensure that the vehicle is parked on a level surface and the engine is cool. Gather all the necessary tools and materials listed above.
Step 1: Raise the Vehicle
Using a jack, lift the W213 E63 and securely place it on jack stands. Ensure that the vehicle is stable and safe to work under.
Step 2: Remove the Stock Exhaust
Locate the stock exhaust system. Use the socket set to remove the bolts securing the exhaust to the catalytic converter and the hangers. Carefully lower the stock exhaust system and set it aside.
Step 3: Install the Milltek Exhaust
Begin by positioning the Milltek Sport Cat-back exhaust in place. Align it with the catalytic converter and secure it using the provided bolts. Ensure that the exhaust is properly seated and leveled.
Step 4: Secure the Exhaust Hangers
Using the exhaust hanger tool, carefully attach the exhaust hangers to their respective mounting points on the vehicle. Make sure each hanger is securely fastened to avoid any rattling or movement.
Step 5: Tighten All Bolts
Once the exhaust is in place, go back and tighten all the bolts using the socket set. Ensure that everything is secure and properly aligned.
Step 6: Lower the Vehicle
Carefully remove the jack stands and lower the vehicle back to the ground. Make sure everything is clear from underneath before lowering.
Step 7: Test the Exhaust
Start the engine and let it idle for a few minutes. Listen for any unusual noises and check for leaks around the joints. Ensure that the exhaust is functioning properly and that the sound meets your expectations.
Conclusion
The installation of the Milltek Sport Cat-back exhaust on the W213 E63 is a straightforward process that can be completed with basic tools. Enjoy the enhanced sound and performance that comes with your new exhaust system.