Table of Contents
The AFE Power Cold Air Intake system is a popular upgrade for the Ram 1500 TRX, providing a significant boost in horsepower and performance. This guide will walk you through the step-by-step installation process to help you achieve up to a 25 horsepower increase.
Tools and Materials Needed
- AFE Power Cold Air Intake Kit
- Socket wrench set
- Flathead screwdriver
- Phillips screwdriver
- Torque wrench
- Shop towel
- Safety glasses
Preparation
Before starting the installation, ensure that you have all tools and materials ready. It’s also essential to work in a well-ventilated area and wear safety glasses to protect your eyes.
Step 1: Disconnect the Battery
Begin by disconnecting the negative terminal of the battery. This step is crucial to prevent any electrical shorts during the installation process.
Step 2: Remove the Engine Cover
Using a socket wrench, remove the bolts securing the engine cover. Carefully lift the cover off and set it aside.
Step 3: Remove the Factory Air Intake System
Loosen the hose clamp on the throttle body using a flathead screwdriver. Disconnect the air intake duct from the throttle body and pull it off. Next, remove the factory air filter and the air box by unscrewing any bolts or clips holding it in place.
Step 4: Install the AFE Power Cold Air Intake
Begin by placing the new AFE air box in the same location as the factory one. Secure it using the provided bolts. Next, insert the AFE air filter into the air box, ensuring it fits snugly.
Step 5: Connect the Intake Duct
Attach the intake duct to the throttle body. Make sure the hose clamp is tightened securely. This connection is vital for maintaining airflow and performance.
Step 6: Reinstall the Engine Cover
Carefully place the engine cover back on and secure it with the bolts you removed earlier. Ensure that everything is tight and properly positioned.
Step 7: Reconnect the Battery
Reconnect the negative terminal of the battery. This step restores power to the vehicle’s electrical system.
Final Checks
Before taking your Ram 1500 TRX for a test drive, double-check all connections and ensure that everything is secure. Look for any loose clamps or bolts and tighten them as necessary.
Testing Performance
After installation, take your vehicle for a test drive to experience the improved performance. You should notice a more responsive throttle and increased horsepower. Monitor the engine for any unusual sounds or warning lights.
Conclusion
The installation of the AFE Power Cold Air Intake on your Ram 1500 TRX is a straightforward process that can lead to substantial performance gains. By following these steps, you can enhance your vehicle’s power and efficiency, making your driving experience even more enjoyable.