Table of Contents
The AMS Alpha 9 Turbo Kit is a popular choice for those looking to enhance the performance of their M4, aiming for an impressive 750+ horsepower. This guide will walk you through the step-by-step installation process to ensure you can achieve your performance goals.
Tools and Materials Needed
- AMS Alpha 9 Turbo Kit
- Socket set
- Torque wrench
- Screwdrivers (flathead and Phillips)
- Pliers
- Heat-resistant gloves
- Safety glasses
- Shop towels
- Engine oil
- Coolant
Preparation Steps
Before beginning the installation, it is crucial to prepare your workspace and vehicle. Follow these steps:
- Ensure your vehicle is parked on a flat surface.
- Disconnect the battery to prevent any electrical issues.
- Gather all tools and materials needed for the installation.
- Read through the AMS Alpha 9 Turbo Kit manual for specific instructions and safety precautions.
Removing the Stock Components
The first step in the installation process is to remove the stock components that will be replaced by the turbo kit. Follow these detailed steps:
- Remove the front bumper by unscrewing the bolts and clips holding it in place.
- Disconnect the fog lights and any other wiring connected to the bumper.
- Take out the stock intake system by unbolting it from the engine bay.
- Remove the stock turbocharger and associated piping carefully.
- Drain the engine coolant from the system to avoid spills during the installation.
Installing the AMS Alpha 9 Turbo Kit
With the stock components removed, you can now begin installing the AMS Alpha 9 Turbo Kit. Follow these steps closely:
- Begin by installing the new turbocharger onto the engine. Ensure all gaskets are in place to avoid leaks.
- Connect the new turbo piping to the turbocharger and tighten the clamps securely.
- Install the new intake system, ensuring it fits snugly against the engine.
- Reconnect any wiring or sensors that were disconnected during the removal process.
- Install the front bumper back onto the vehicle, securing it with the previously removed bolts and clips.
Final Steps
After the installation of the AMS Alpha 9 Turbo Kit, it is essential to complete the following final steps:
- Refill the engine coolant and check for any leaks in the system.
- Reconnect the battery and start the engine, allowing it to idle for a few minutes.
- Check for any unusual sounds or leaks during the idle period.
- Take the vehicle for a short test drive to ensure everything is functioning correctly.
- Monitor the vehicle’s performance and make any necessary adjustments.
Conclusion
The installation of the AMS Alpha 9 Turbo Kit can significantly enhance the performance of your M4, achieving the desired 750+ horsepower. By following this step-by-step guide, you can ensure a successful installation and enjoy the benefits of your upgraded vehicle.