Step-by-step Installation of the Bnr (banknerf Racing) 60mm Turbo on the Elantra N

by

The installation of the BNR (BankNerf Racing) 60mm Turbo on the Elantra N can enhance performance significantly. This guide provides a detailed, step-by-step process to ensure a successful installation.

Tools and Materials Needed

  • BNR 60mm Turbo Kit
  • Socket set
  • Torque wrench
  • Screwdrivers (flathead and Phillips)
  • Wrenches
  • Oil and coolant
  • Hoses and clamps
  • Gasket maker
  • Safety gloves and goggles

Preparation

Before starting the installation, ensure the vehicle is parked on a flat surface and the engine is cool. Disconnect the battery to prevent any electrical issues.

Step 1: Remove the Existing Turbo

Begin by removing the factory turbocharger. Follow these sub-steps:

  • Remove the intake duct by loosening the clamps.
  • Disconnect the wastegate actuator and any electrical connectors.
  • Unbolt the turbo from the exhaust manifold.
  • Carefully detach the turbo from the downpipe.
  • Remove any remaining hoses connected to the turbo.

Step 2: Prepare the New Turbo

Once the old turbo is removed, prepare the BNR 60mm Turbo for installation:

  • Inspect the new turbo for any damage.
  • Apply gasket maker to the mating surfaces.
  • Ensure all necessary fittings and hoses are included.

Step 3: Install the BNR 60mm Turbo

With the new turbo ready, proceed to install it:

  • Position the turbo onto the exhaust manifold.
  • Secure the turbo with bolts and torque them to the manufacturer’s specifications.
  • Connect the downpipe to the turbo and tighten the clamps.
  • Reconnect the wastegate actuator and electrical connectors.
  • Attach the intake duct and ensure all clamps are secure.

Step 4: Reconnect the Battery and Check for Leaks

After the turbo is installed, reconnect the battery and check for any leaks:

  • Start the engine and let it idle for a few minutes.
  • Inspect all connections for any signs of leaks.
  • Check oil and coolant levels, topping them off if necessary.

Step 5: Test Drive

Once everything is checked and secure, take the car for a test drive:

  • Drive at various speeds to ensure proper operation.
  • Listen for any unusual noises indicating issues.
  • Monitor performance and responsiveness.

Conclusion

Installing the BNR 60mm Turbo on the Elantra N can be a rewarding upgrade. By following these steps carefully, you can enhance your vehicle’s performance and enjoy the benefits of improved power and efficiency.