Step-by-step Installation of the Dinan Suspension Upgrade on Cla45 Amg

by

The Dinan Suspension Upgrade is a popular modification for the Mercedes-Benz CLA45 AMG, enhancing both performance and handling. This article provides a comprehensive, step-by-step guide to installing the Dinan suspension upgrade on your CLA45 AMG.

Tools and Materials Required

  • Jack and jack stands
  • Torque wrench
  • Socket set
  • Wrenches
  • Spring compressors
  • Dinan suspension kit
  • Safety glasses
  • Mechanics gloves

Preparation Steps

Before starting the installation, ensure you have a clean working area and all necessary tools and materials at hand. Follow these preparation steps:

  • Park the vehicle on a flat surface.
  • Engage the parking brake.
  • Put on safety glasses and mechanics gloves.

Step 1: Lifting the Vehicle

To access the suspension components, you’ll need to lift the vehicle. Follow these steps:

  • Use the jack to lift the front of the vehicle.
  • Place jack stands securely under the vehicle.
  • Repeat for the rear of the vehicle.

Step 2: Removing the Front Suspension Components

To install the Dinan suspension, you must first remove the existing front suspension components:

  • Remove the front wheels using the socket set.
  • Disconnect the sway bar links from the struts.
  • Unbolt the lower control arm from the strut.
  • Remove the strut assembly from the vehicle.

Step 3: Installing the Dinan Front Suspension

Now that the old suspension is removed, you can install the Dinan suspension components:

  • Use spring compressors to compress the Dinan springs.
  • Install the Dinan strut assembly into the vehicle.
  • Reconnect the lower control arm to the strut.
  • Reconnect the sway bar links to the struts.

Step 4: Removing the Rear Suspension Components

Next, you will need to remove the rear suspension components:

  • Remove the rear wheels using the socket set.
  • Unbolt the lower control arm from the rear strut.
  • Remove the rear strut assembly from the vehicle.

Step 5: Installing the Dinan Rear Suspension

With the old rear suspension removed, proceed with the installation of the Dinan components:

  • Compress the Dinan rear springs with spring compressors.
  • Install the Dinan rear strut assembly into the vehicle.
  • Reconnect the lower control arm to the rear strut.

Step 6: Finalizing the Installation

After both the front and rear suspensions have been installed, follow these final steps:

  • Double-check all connections and bolts for proper torque specifications.
  • Reinstall the wheels and lower the vehicle back to the ground.
  • Test drive the vehicle to ensure proper handling and performance.

Conclusion

The installation of the Dinan suspension upgrade on your CLA45 AMG can significantly enhance your driving experience. By following this step-by-step guide, you can ensure a successful installation and enjoy improved performance on the road.