Step-by-step Installation of the Jsm Supercharger Kit on a C63 M156

by

The JSM Supercharger Kit is an excellent upgrade for the C63 M156, significantly enhancing performance. This article provides a detailed, step-by-step guide to installing the kit, ensuring you have all the necessary information to complete the process successfully.

Tools and Materials Needed

  • JSM Supercharger Kit
  • Socket set
  • Wrench set
  • Torque wrench
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Ratcheting straps
  • Engine oil
  • Coolant
  • Shop towels
  • Safety glasses
  • Gloves

Preparation Steps

Before starting the installation, ensure that you have a clean workspace and all the necessary tools and materials at hand. Follow these preparation steps:

  • Disconnect the battery to prevent any electrical issues.
  • Remove the engine cover by unscrewing the bolts holding it in place.
  • Drain the coolant from the radiator and engine block.
  • Remove any components obstructing access to the engine, such as the intake manifold.

Installing the JSM Supercharger Kit

Follow these steps to install the JSM Supercharger Kit:

Step 1: Install the Supercharger Bracket

Begin by attaching the supercharger bracket to the engine. Use the provided bolts and a torque wrench to ensure they are tightened to the manufacturer’s specifications.

Step 2: Mount the Supercharger

Carefully mount the supercharger onto the bracket. Ensure that it is aligned correctly and secure it with the bolts. Double-check the tightness of all connections.

Step 3: Connect the Intake and Exhaust

Connect the intake and exhaust pipes to the supercharger. Use new gaskets to prevent leaks and tighten the bolts securely.

Step 4: Install the Drive Belt

Install the drive belt according to the diagram provided in the kit. Ensure it is properly tensioned and aligned with all pulleys.

Step 5: Connect the Cooling System

Reconnect the coolant lines to the supercharger. Make sure all clamps are secure to prevent leaks.

Step 6: Reinstall the Intake Manifold

Reinstall the intake manifold, ensuring that all gaskets are in good condition. Tighten the bolts to the specified torque settings.

Step 7: Reconnect Electrical Components

Reconnect any electrical components that were removed during the installation process. Ensure all connections are secure.

Final Steps

Once the installation is complete, follow these final steps:

  • Refill the coolant in the radiator and engine block.
  • Reconnect the battery.
  • Start the engine and let it idle for a few minutes.
  • Check for any leaks and ensure everything is functioning correctly.
  • Take the vehicle for a test drive to ensure the supercharger is performing as expected.

Conclusion

Installing the JSM Supercharger Kit on a C63 M156 can significantly enhance your vehicle’s performance. By following this step-by-step guide, you can ensure a successful installation. Always remember to follow safety precautions and consult a professional if you encounter any challenges during the process.