Table of Contents
The Mitsubishi TD04L-13T turbocharger is a popular upgrade for the Hyundai Veloster N, providing significant improvements in power and performance. This guide will walk you through the step-by-step installation process to ensure a successful upgrade.
Tools and Materials Needed
- Mitsubishi TD04L-13T Turbocharger
- Turbocharger installation kit
- Socket set
- Torque wrench
- Screwdrivers (flathead and Phillips)
- Intercooler piping
- Silicone couplers
- New gaskets
- Oil feed and return lines
- Safety glasses and gloves
Preparation
Before starting the installation, ensure that you have all the necessary tools and materials at hand. Additionally, park the Veloster N on a level surface and allow the engine to cool down completely.
Step 1: Remove the Stock Turbocharger
Begin by disconnecting the battery to prevent any electrical issues. Next, remove the engine cover and any components obstructing access to the turbocharger.
Disconnect the intake and exhaust piping from the stock turbo. Carefully detach the oil feed and return lines, ensuring to catch any oil that may spill.
Finally, unbolt the stock turbocharger from the manifold and remove it from the vehicle.
Step 2: Install the Mitsubishi TD04L-13T Turbo
Before installing the new turbo, ensure that the mounting surfaces are clean and free of debris. Place the new gasket onto the manifold and position the TD04L-13T turbocharger onto the manifold.
Secure the turbocharger with the provided bolts, using a torque wrench to tighten them to the manufacturer’s specifications.
Step 3: Connect Oil Lines
Attach the oil feed line to the turbo, ensuring a secure fit. Follow this by connecting the oil return line, making sure it is properly seated to prevent leaks.
Step 4: Install Intercooler Piping
Next, connect the intercooler piping to the turbocharger. Use silicone couplers to ensure a tight seal between the turbo and the intercooler.
Step 5: Reconnect Intake and Exhaust Piping
Reconnect the intake piping to the turbocharger, followed by the exhaust piping. Ensure all connections are secure and free of leaks.
Step 6: Reinstall Engine Components
Replace any components that were removed during the initial disassembly, including the engine cover. Double-check that all bolts and connections are tightened appropriately.
Step 7: Reconnect the Battery
Once everything is in place, reconnect the battery. Check for any loose connections or potential issues before starting the engine.
Step 8: Test the Installation
Start the engine and allow it to idle for a few minutes. Check for any leaks around the turbocharger and oil lines. Take the vehicle for a short test drive to ensure everything is functioning properly.
Conclusion
Installing the Mitsubishi TD04L-13T turbocharger on your Veloster N can significantly enhance its performance. By following these steps carefully, you can achieve a successful installation and enjoy the benefits of increased power and efficiency.