Table of Contents
The Mopar 360 Performance Camshaft and Intake are popular upgrades for enhancing the performance of your engine. This guide provides a detailed, step-by-step installation process to help you achieve the best results.
Tools and Materials Needed
- Socket set
- Wrench set
- Torque wrench
- Screwdrivers
- Gasket scraper
- New gaskets
- Engine oil
- Assembly lubricant
- Performance camshaft
- Intake manifold
Preparation Steps
Before beginning the installation process, it’s crucial to prepare your workspace and engine.
- Ensure the engine is cool.
- Disconnect the battery.
- Remove any accessories that obstruct access to the intake manifold and camshaft.
Removing the Old Camshaft and Intake
Follow these steps to remove the old components safely.
- Remove the intake manifold bolts using a socket wrench.
- Carefully lift the intake manifold off the engine.
- Remove the old gaskets and clean the mating surfaces.
- Remove the timing cover to access the camshaft.
- Disconnect the timing chain or belt from the camshaft.
- Unbolt the old camshaft and carefully slide it out.
Installing the New Camshaft
Now it’s time to install the new Mopar 360 Performance Camshaft.
- Apply assembly lubricant to the new camshaft.
- Carefully slide the new camshaft into the engine.
- Align the camshaft with the timing chain or belt.
- Secure the camshaft with bolts and torque them to specifications.
Installing the New Intake Manifold
With the camshaft in place, you can now install the new intake manifold.
- Place new gaskets onto the engine block.
- Carefully position the intake manifold over the gaskets.
- Insert and hand-tighten the intake manifold bolts.
- Use a torque wrench to tighten the bolts to the manufacturer’s specifications.
Final Steps
After installing the camshaft and intake, follow these final steps to complete the installation.
- Reinstall the timing cover and secure it with bolts.
- Reconnect any accessories that were removed.
- Reconnect the battery.
- Double-check all connections and ensure everything is secure.
Testing the Installation
Once everything is installed, it’s essential to test the engine to ensure proper functionality.
- Start the engine and let it idle.
- Check for any leaks around the intake manifold and camshaft.
- Listen for unusual noises that may indicate installation issues.
- Take the vehicle for a test drive to assess performance improvements.
Conclusion
The installation of the Mopar 360 Performance Camshaft and Intake can significantly enhance your engine’s performance. By following these steps carefully, you can ensure a successful upgrade that will provide lasting benefits.