Step-by-step Installation of the Renntech M177 Performance Package for Mercedes-amg C63 S

by

The Renntech M177 Performance Package significantly enhances the performance of the Mercedes-AMG C63 S. This guide provides a detailed step-by-step installation process for enthusiasts looking to upgrade their vehicle’s capabilities.

Tools and Materials Needed

  • Socket set
  • Torque wrench
  • Flathead screwdriver
  • Phillips screwdriver
  • Renntech M177 Performance Package
  • Vehicle jack and jack stands
  • Safety glasses
  • Gloves

Safety Precautions

Before starting the installation, ensure you take the necessary safety precautions:

  • Always wear safety glasses and gloves.
  • Work in a well-ventilated area.
  • Ensure the vehicle is on a flat surface.
  • Use jack stands to secure the vehicle when lifted.

Step 1: Preparing the Vehicle

Begin by preparing your Mercedes-AMG C63 S for the installation:

  • Park the vehicle on a level surface.
  • Disconnect the battery to prevent any electrical issues.
  • Lift the front of the vehicle using a jack and secure it with jack stands.

Step 2: Removing the Stock Components

Carefully remove the stock components that will be replaced by the Renntech package:

  • Remove the engine cover by unscrewing the bolts.
  • Disconnect any electrical connectors attached to the engine cover.
  • Take off the intake system by loosening the clamps and removing the hoses.

Step 3: Installing the Renntech Performance Package

Now it’s time to install the Renntech M177 Performance Package:

  • Begin by installing the new intake system. Position the intake and secure it with the provided clamps.
  • Reconnect any electrical connectors that were disconnected.
  • Install the Renntech ECU tuning module according to the instructions provided in the package.

Step 4: Reassembling the Vehicle

Once the performance package is installed, reassemble the vehicle:

  • Replace the engine cover and secure it with the original bolts.
  • Reconnect the battery terminals.
  • Double-check all connections and ensure everything is secure.

Step 5: Testing the Installation

After reassembly, it is crucial to test the installation:

  • Start the engine and listen for any unusual sounds.
  • Check for leaks around the intake system.
  • Take the vehicle for a short test drive to ensure everything is functioning correctly.

Conclusion

The installation of the Renntech M177 Performance Package for the Mercedes-AMG C63 S can greatly enhance performance and driving experience. Following these steps ensures a successful upgrade, allowing you to enjoy the full benefits of your vehicle.