Table of Contents
The RIPP Supercharger is a popular upgrade for the 5.7L Ram 1500, providing increased horsepower and torque. This article will guide you through the step-by-step installation process to help you maximize your truck’s performance.
Tools and Materials Needed
- RIPP Supercharger Kit
- Socket set
- Wrenches
- Screwdrivers
- Torque wrench
- Vacuum hose cutter
- Coolant
- Oil
- Shop towels
- Safety glasses
Preparation
Before starting the installation, ensure that your vehicle is parked on a flat surface. Disconnect the negative battery terminal to prevent any electrical issues during the installation process.
Removing the Stock Components
Begin by removing the stock air intake system. This includes the air filter, intake tubing, and throttle body. Use your socket set and wrenches to detach the necessary components.
Next, drain the engine coolant by removing the radiator cap and opening the drain valve at the bottom of the radiator. Collect the coolant in a suitable container.
Removing the Throttle Body
Carefully detach the throttle body from the intake manifold. Make sure to keep track of the screws and any gaskets that may need to be replaced later.
Installing the RIPP Supercharger
With the stock components removed, it’s time to install the RIPP Supercharger. Begin by placing the supercharger in position over the intake manifold.
Secure the supercharger using the provided bolts, ensuring they are tightened to the manufacturer’s specifications using a torque wrench.
Connecting the Throttle Body
Reattach the throttle body to the supercharger. Ensure that all gaskets are properly seated to prevent any air leaks.
Installing the Intake and Other Components
Install the new intake system that comes with the RIPP kit. This typically includes new tubing and an upgraded air filter. Make sure all connections are secure.
Reconnect any vacuum lines and electrical connectors that were removed during the disassembly process. Double-check that everything is in place.
Final Steps
After all components are installed, refill the engine coolant and check for any leaks. Reconnect the negative battery terminal.
Start the engine and let it idle for a few minutes. Listen for any unusual noises and check the gauge readings to ensure everything is functioning correctly.
Testing the Installation
Take your Ram 1500 for a test drive. Pay attention to the throttle response and overall performance. If everything feels right, you have successfully installed the RIPP Supercharger!
Conclusion
Installing the RIPP Supercharger on your 5.7L Ram 1500 can significantly enhance your truck’s performance. By following these steps, you can achieve a successful installation and enjoy the benefits of increased power and torque.