Table of Contents
The Skunk2 J35 Exhaust System is a popular upgrade for those looking to enhance the sound and performance of their vehicle. In this article, we will walk you through the step-by-step installation process to ensure you get the best out of your exhaust system.
Tools and Materials Needed
- Skunk2 J35 Exhaust System
- Socket wrench set
- Torque wrench
- Jack and jack stands
- Safety goggles
- Gloves
- Shop towels
Before starting the installation, ensure you have all the necessary tools and materials at hand. This will make the process smoother and more efficient.
Preparation
Begin by preparing your vehicle for the installation. Ensure the car is parked on a level surface and the engine is cool. Gather your tools and materials, and wear safety goggles and gloves for protection.
Step 1: Lift the Vehicle
Using a jack, lift the rear of the vehicle and secure it with jack stands. This will provide you with ample space to work under the car.
Step 2: Remove the Stock Exhaust System
Locate the stock exhaust system. Using your socket wrench, remove the bolts securing the exhaust to the exhaust manifold and the hangers holding it in place. Carefully detach the exhaust from the vehicle and set it aside.
Step 3: Install the Skunk2 Exhaust System
Begin by positioning the Skunk2 J35 Exhaust System in place. Ensure that the exhaust flange aligns with the exhaust manifold. Secure it using the provided bolts. Make sure to tighten them to the manufacturer’s specifications using a torque wrench.
Step 4: Attach the Hangers
Next, attach the exhaust hangers to their respective mounting points on the vehicle. Ensure that the exhaust is properly supported and aligned before fully tightening the bolts.
Step 5: Double Check Everything
Before lowering the vehicle, double-check all connections and bolts to ensure everything is secure. This will prevent any issues once the vehicle is back on the ground.
Final Steps
Once you are satisfied with the installation, carefully lower the vehicle back to the ground and start the engine. Listen for any unusual sounds and check for leaks. If everything sounds good, you have successfully installed the Skunk2 J35 Exhaust System!
Conclusion
The Skunk2 J35 Exhaust System not only enhances the sound of your vehicle but also improves performance. By following these steps, you can ensure a successful installation. Enjoy your new exhaust system and the benefits it brings!