Table of Contents
The Turbosmart Anti-lag System is a popular modification among Subaru STI enthusiasts, providing improved throttle response and reduced turbo lag. This article will guide you through the step-by-step installation process, along with tips and cost considerations to help you achieve optimal results.
Understanding the Turbosmart Anti-lag System
The Turbosmart Anti-lag System is designed to maintain boost pressure during gear shifts and deceleration, allowing for quicker acceleration. This system is particularly beneficial for those who participate in motorsports or enjoy spirited driving.
Required Tools and Materials
- Turbosmart Anti-lag System kit
- Socket set
- Wrenches
- Screwdrivers
- Wire cutters and strippers
- Electrical tape
- Zip ties
- Multimeter
Step-by-Step Installation Process
Step 1: Preparation
Before starting the installation, ensure your vehicle is parked on a flat surface and the engine is cool. Disconnect the battery to prevent any electrical issues during the installation process.
Step 2: Remove the Factory Components
Begin by removing the factory components that will be replaced by the Turbosmart system. This typically includes the factory boost control solenoid and any associated vacuum lines. Take care to label and store these components for future reference.
Step 3: Install the Turbosmart Anti-lag System
Follow the instructions provided with your Turbosmart kit to install the new components. This generally involves connecting the new boost control solenoid and routing the necessary vacuum lines. Ensure all connections are secure and free from leaks.
Step 4: Wiring the System
The wiring process is crucial for the proper functioning of the Anti-lag System. Use the wiring diagram provided in the kit to connect the system to the vehicle’s electrical system. Ensure all connections are tight and insulated with electrical tape to prevent short circuits.
Step 5: Reconnect the Battery
Once the installation is complete, reconnect the battery. Double-check all connections and ensure that there are no loose wires or components.
Step 6: Testing the System
Start the engine and allow it to idle for a few minutes. Check for any leaks or abnormal sounds. Once you are satisfied that everything is functioning correctly, take the vehicle for a test drive to experience the benefits of the Anti-lag System.
Tips for Successful Installation
- Read the installation manual thoroughly before starting.
- Take your time and do not rush the installation process.
- Consult online forums or videos for additional guidance.
- Consider enlisting the help of a friend or a professional if you are unsure.
Cost Considerations
The cost of installing the Turbosmart Anti-lag System can vary based on several factors, including:
- Price of the Turbosmart kit (typically ranges from $300 to $600).
- Cost of additional tools or parts needed for installation.
- Labor costs if you choose to have a professional install the system.
Conclusion
Installing the Turbosmart Anti-lag System on your Subaru STI can significantly enhance performance and driving experience. By following this step-by-step guide and considering the tips and cost factors outlined, you can successfully complete the installation and enjoy the benefits of reduced turbo lag.