Table of Contents
The TurboXS upgraded intercooler is a popular modification for the Subaru Forester, enhancing performance and efficiency. This guide provides a detailed, step-by-step installation process to help you upgrade your intercooler effectively.
Tools and Materials Needed
- TurboXS upgraded intercooler kit
- Socket set
- Wrenches
- Screwdrivers (flathead and Phillips)
- Torque wrench
- Hose clamps
- Silicone hose (if needed)
- Shop towels
- Safety glasses
Preparation Steps
Before starting the installation, ensure that you have all the necessary tools and materials ready. Follow these preparation steps:
- Park your Forester on a flat surface and engage the parking brake.
- Disconnect the battery to prevent any electrical issues during installation.
- Allow the engine to cool down completely before starting work.
Removing the Stock Intercooler
Follow these steps to remove the stock intercooler from your Forester:
- Locate the stock intercooler in the engine bay.
- Remove the air intake duct by loosening the clamps and disconnecting it.
- Disconnect the intercooler piping by loosening the hose clamps on both ends.
- Unbolt the stock intercooler from its mounting points using a socket wrench.
- Carefully lift the intercooler out of the engine bay and set it aside.
Installing the TurboXS Upgraded Intercooler
Now that the stock intercooler is removed, it’s time to install the TurboXS upgraded intercooler. Follow these steps:
- Position the TurboXS intercooler in the engine bay where the stock intercooler was located.
- Align the mounting points of the intercooler with the factory holes.
- Secure the intercooler by bolting it into place using the provided hardware.
- Reconnect the intercooler piping, ensuring that the hoses fit snugly and are secured with hose clamps.
- Reattach the air intake duct, making sure all connections are tight.
Final Steps
Once the intercooler is installed, there are a few final steps to complete the installation:
- Reconnect the battery and ensure all electrical connections are secure.
- Start the engine and let it idle for a few minutes to check for leaks.
- Inspect all connections and clamps to ensure everything is tight and secure.
- Take the vehicle for a test drive to assess the performance of the new intercooler.
Conclusion
Installing the TurboXS upgraded intercooler on your Subaru Forester can significantly improve your vehicle’s performance. By following these steps carefully, you can ensure a successful installation and enjoy the benefits of enhanced power and efficiency.