Step-by-step Installation of the Wagner Tuning Air to Water Intercooler for Nissan Gt-r

by

The Nissan GT-R is renowned for its performance, and upgrading the intercooler is a common modification to enhance power and efficiency. The Wagner Tuning Air to Water Intercooler is a popular choice among enthusiasts. This article provides a step-by-step guide to installing this intercooler in your GT-R.

Tools and Materials Needed

  • Wagner Tuning Air to Water Intercooler
  • Socket set
  • Wrenches
  • Screwdrivers
  • Hoses and clamps
  • Coolant
  • Heat-resistant tape
  • Safety goggles
  • Gloves
  • Torque wrench

Preparation Steps

Before starting the installation, ensure that you have all the necessary tools and materials. It is essential to work in a well-ventilated area and wear safety goggles and gloves to protect yourself during the installation process.

Step 1: Remove the Front Bumper

Begin by removing the front bumper of the Nissan GT-R. This step is crucial for accessing the factory intercooler.

  • Locate the screws and clips securing the bumper.
  • Carefully detach the bumper, ensuring not to damage any wiring.

Step 2: Disconnect the Factory Intercooler

Once the bumper is removed, you can access the factory intercooler. Disconnect the hoses and remove the intercooler from its mounting points.

  • Loosen and remove the clamps securing the hoses.
  • Unbolt the intercooler from the mounting brackets.

Step 3: Prepare the Wagner Intercooler

Before installing the Wagner intercooler, ensure it is ready for installation. Check all fittings and hoses to ensure compatibility.

  • Inspect the intercooler for any damage.
  • Attach any necessary fittings or brackets.

Step 4: Install the Wagner Intercooler

Now it’s time to install the new Wagner intercooler. Position it in the same location as the factory intercooler.

  • Secure the intercooler to the mounting brackets using the provided bolts.
  • Reconnect the hoses, ensuring they are properly seated and secured with clamps.

Step 5: Reconnect the Front Bumper

After the intercooler is securely installed, it’s time to reattach the front bumper.

  • Align the bumper with the mounting points.
  • Secure it with the screws and clips that were removed earlier.

Step 6: Fill the Cooling System

With the intercooler and bumper reinstalled, you need to fill the cooling system with coolant.

  • Locate the coolant reservoir and fill it with the appropriate coolant.
  • Check for any leaks around the hoses and fittings.

Step 7: Test the Installation

Before taking your GT-R for a drive, it’s essential to test the installation to ensure everything is functioning correctly.

  • Start the engine and let it idle for a few minutes.
  • Check for any abnormal noises or leaks.
  • Take the car for a short test drive to monitor performance.

Conclusion

Installing the Wagner Tuning Air to Water Intercooler in your Nissan GT-R can significantly improve its performance. By following this step-by-step guide, you can ensure a successful installation. Always remember to double-check all connections and monitor the system after installation for optimal performance.