Table of Contents
Upgrading your Civic Type R with a Garrett GTX2863R turbocharger can significantly enhance its performance. This step-by-step guide will walk you through the installation process, ensuring better boost and overall power.
Tools and Materials Needed
- Garrett GTX2863R turbocharger
- Turbocharger install kit
- Socket set
- Wrench set
- Screwdriver set
- Torque wrench
- Silicone hose connectors
- Oil feed line
- Oil drain line
- Intercooler piping
- Gaskets
- Shop towels
Preparation Steps
Before starting the installation, ensure your workspace is clean and organized. Gather all necessary tools and materials to streamline the process.
Disconnect the battery to prevent any electrical issues during the installation. This is a crucial safety step.
Removing the Stock Turbocharger
Begin by removing the engine cover to access the turbocharger. Use your socket set to unscrew the bolts securing the cover.
Next, disconnect the intake piping from the stock turbo. Loosen the clamps and carefully remove the piping.
Remove the oil feed and drain lines from the stock turbo. Be prepared for any residual oil to spill, so have shop towels ready.
Unbolt the stock turbo from the manifold using a wrench. Carefully lift the turbo out of the engine bay, ensuring no other components are damaged during removal.
Installing the Garrett GTX2863R Turbocharger
Begin by preparing the new Garrett GTX2863R turbo. Ensure all necessary gaskets are in place before installation.
Position the turbocharger onto the manifold, aligning it with the bolt holes. Hand-tighten the bolts to secure it in place.
Using a torque wrench, tighten the bolts to the manufacturer’s specifications. This ensures a proper seal and prevents leaks.
Reconnect the oil feed and drain lines to the new turbo, ensuring they are secure and free of leaks.
Connecting the Intake and Intercooler Piping
Attach the intake piping to the GTX2863R turbo. Ensure the silicone hose connectors are tight and secure.
Install the intercooler piping, making sure there are no gaps or leaks. Secure all clamps properly.
Final Steps and Testing
Reinstall the engine cover and reconnect the battery. Double-check all connections and ensure everything is secure.
Start the engine and let it idle for a few minutes. Check for any leaks and listen for unusual noises.
Take the car for a test drive to ensure proper functionality. Monitor boost levels and overall performance to confirm the successful installation of the Garrett GTX2863R turbocharger.
Conclusion
Installing a Garrett GTX2863R turbocharger on your Civic Type R can greatly improve your vehicle’s performance. By following these steps carefully, you can achieve better boost and enjoy the enhanced driving experience.