Step-by-step: Installing a Mishimoto Evo Clutch Kit – Tips and Tricks for a Smooth Swap

by

Installing a Mishimoto Evo Clutch Kit can significantly enhance your vehicle’s performance. Whether you’re a seasoned mechanic or a DIY enthusiast, this guide will walk you through the installation process step-by-step. With the right tools and a bit of patience, you can achieve a smooth swap.

Tools and Materials Needed

  • Mishimoto Evo Clutch Kit
  • Socket set
  • Torque wrench
  • Jack and jack stands
  • Transmission fluid
  • Brake cleaner
  • Clutch alignment tool
  • Safety glasses
  • Mechanic gloves

Before starting the installation, ensure you have all the necessary tools and materials on hand. This will help streamline the process and prevent any interruptions.

Preparation Steps

Preparation is key to a successful clutch installation. Follow these steps to get ready:

  • Park your vehicle on a flat surface and engage the parking brake.
  • Disconnect the negative battery terminal to avoid any electrical issues.
  • Lift the vehicle using a jack, and secure it with jack stands.
  • Remove the wheels for easier access to the transmission.

Once you have prepared your workspace, you can move on to the actual installation of the clutch kit.

Removing the Old Clutch

Follow these steps to remove the old clutch:

  • Remove the transmission bolts using a socket set.
  • Carefully detach the transmission from the engine.
  • Remove the old clutch assembly, including the pressure plate and disc.
  • Inspect the flywheel for any damage and clean it with brake cleaner.

Ensure that all components are free from debris and damage before proceeding to the installation of the new clutch kit.

Installing the Mishimoto Evo Clutch Kit

Now that the old clutch is removed, it’s time to install the new Mishimoto Evo Clutch Kit:

  • Place the new clutch disc onto the flywheel, ensuring it is aligned properly.
  • Use the clutch alignment tool to keep the disc centered.
  • Attach the pressure plate over the clutch disc and hand-tighten the bolts.
  • Using a torque wrench, tighten the pressure plate bolts to the manufacturer’s specifications.
  • Reconnect the transmission to the engine, ensuring all bolts are secure.

Double-check all connections and ensure everything is tightened correctly before moving on.

Final Steps

After installing the new clutch, follow these final steps:

  • Reinstall the wheels and lower the vehicle back to the ground.
  • Reconnect the negative battery terminal.
  • Check the transmission fluid level and add fluid if necessary.
  • Start the vehicle and test the clutch operation.

Make sure to test drive the vehicle to ensure everything is functioning smoothly. If you notice any issues, recheck your installation.

Tips and Tricks for a Smooth Swap

Here are some tips to ensure a smooth installation process:

  • Take your time and don’t rush the installation.
  • Refer to the Mishimoto installation manual for specific instructions.
  • Keep your workspace organized to avoid losing tools or parts.
  • Have a friend assist you if possible, especially when lifting the transmission.
  • Use high-quality tools to prevent stripping bolts or damaging components.

By following these tips, you can ensure a successful installation of your Mishimoto Evo Clutch Kit.

Conclusion

Installing a Mishimoto Evo Clutch Kit can be a rewarding project that enhances your vehicle’s performance. By following this step-by-step guide and utilizing the tips provided, you can achieve a smooth and efficient swap. Happy driving!