Step-by-step: Installing an Ams Alpha 9 Turbo System on Mitsubishi Evo for 500+ Hp

by

The Mitsubishi Evo has long been a favorite among car enthusiasts, especially those looking to enhance performance. One of the most effective ways to achieve significant power gains is by installing a turbo system. In this article, we will provide a detailed, step-by-step guide on how to install the AMS Alpha 9 Turbo System on a Mitsubishi Evo, aiming for over 500 horsepower.

Tools and Materials Needed

  • AMS Alpha 9 Turbo Kit
  • Socket set
  • Wrenches
  • Screwdrivers
  • Torque wrench
  • Boost gauge
  • Fuel pump upgrade
  • ECU tuning software
  • Safety glasses
  • Gloves

Preparation Steps

Before starting the installation, it is crucial to prepare your workspace and vehicle. Follow these steps to ensure a smooth process:

  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the battery to avoid any electrical issues.
  • Gather all tools and materials in one place.
  • Read through the AMS installation manual thoroughly.

Removing the Stock Turbo System

The first major step in the installation process is to remove the stock turbo system. This can be done by following these steps:

  • Remove the intake manifold and throttle body.
  • Disconnect the exhaust system from the turbo.
  • Unplug all electrical connectors leading to the turbo.
  • Remove the stock turbocharger from the engine bay.
  • Clean the mounting area to ensure a proper fit for the new system.

Installing the AMS Alpha 9 Turbo System

With the stock turbo system removed, you can now begin installing the AMS Alpha 9 Turbo System. Follow these steps carefully:

  • Install the new turbocharger onto the mounting bracket.
  • Connect the oil feed and return lines to the turbo.
  • Install the new exhaust manifold that comes with the AMS kit.
  • Attach the new downpipe to the turbo and connect it to the exhaust system.
  • Reinstall the intake manifold and throttle body.
  • Connect all electrical connectors and sensors.

Upgrading Fuel System

To support the increased power output, it is essential to upgrade the fuel system. This includes:

  • Replacing the stock fuel pump with a higher capacity unit.
  • Installing larger fuel injectors to ensure adequate fuel delivery.
  • Checking fuel lines for any leaks or restrictions.

ECU Tuning

After installing the turbo system and upgrading the fuel system, ECU tuning is necessary for optimal performance. Follow these steps:

  • Connect the ECU tuning software to the vehicle.
  • Load the appropriate tune for the AMS Alpha 9 Turbo System.
  • Adjust parameters such as fuel maps and ignition timing.
  • Save and upload the new tune to the ECU.

Final Checks and Testing

Once everything is installed and tuned, perform the following final checks:

  • Double-check all connections and fittings for leaks.
  • Ensure that the boost gauge is functioning correctly.
  • Start the engine and monitor for any unusual sounds or issues.
  • Take the vehicle for a test drive to assess performance.

Conclusion

Installing the AMS Alpha 9 Turbo System on a Mitsubishi Evo can significantly enhance the vehicle’s performance, pushing it over the 500 horsepower mark. By following this step-by-step guide, you can ensure a successful installation and enjoy the thrilling power that comes with it.