Supercharger Guide: Installing a Tvs 2650 on a Dodge Ram for 180+ Additional Horsepower

by

Installing a supercharger can significantly enhance the performance of your Dodge Ram, providing an exhilarating boost in horsepower. The TVS 2650 supercharger is a popular choice among enthusiasts looking to gain 180+ additional horsepower. This guide will walk you through the installation process step by step.

Understanding the TVS 2650 Supercharger

The TVS 2650 supercharger is designed to deliver exceptional performance and efficiency. It utilizes a twin-screw design that allows for increased air intake and improved engine response. Here are some key features:

  • High efficiency at various RPMs
  • Compact design for easier installation
  • Durable construction for long-lasting performance

Tools and Materials Needed

Before starting the installation, gather the following tools and materials:

  • Socket set
  • Wrench set
  • Torque wrench
  • Supercharger kit (TVS 2650)
  • New gaskets
  • Coolant
  • Oil for the supercharger
  • Safety glasses and gloves

Preparation Steps

Proper preparation is crucial for a successful installation. Follow these steps:

  • Disconnect the battery to prevent any electrical issues.
  • Remove any components obstructing access to the engine, such as the air intake and engine cover.
  • Drain the coolant from the radiator to avoid spills during installation.

Installing the TVS 2650 Supercharger

Now that you have prepared your Dodge Ram, it’s time to install the supercharger. Follow these steps carefully:

  • Remove the factory intake manifold by loosening the bolts and carefully lifting it off.
  • Install the new gaskets on the engine block to ensure a proper seal.
  • Position the TVS 2650 supercharger onto the engine, aligning it with the gaskets.
  • Secure the supercharger with the provided bolts, using a torque wrench to tighten them to the manufacturer’s specifications.
  • Reconnect the intake system and any other components you removed earlier.
  • Refill the coolant in the radiator and check for leaks.
  • Connect the battery and ensure all electrical connections are secure.

Tuning Your Dodge Ram

After installing the TVS 2650 supercharger, tuning your engine is essential to maximize performance. Consider the following:

  • Use a performance tuner to adjust fuel maps and ignition timing.
  • Monitor air-fuel ratios to ensure optimal engine performance.
  • Consider dyno tuning for precise adjustments and maximum horsepower gains.

Testing and Final Checks

Once everything is installed and tuned, it’s time for a test drive. Follow these steps:

  • Start the engine and let it idle for a few minutes to ensure proper operation.
  • Take the vehicle for a short drive, gradually increasing speed to test the supercharger’s performance.
  • Check for any unusual sounds or warning lights on the dashboard.
  • Recheck all connections and fluid levels after the initial test drive.

Maintenance Tips for Longevity

To ensure the longevity of your TVS 2650 supercharger, follow these maintenance tips:

  • Regularly check and replace the supercharger oil as recommended by the manufacturer.
  • Inspect all hoses and connections for wear or leaks.
  • Keep the air filter clean to maintain optimal airflow.

Conclusion

Installing a TVS 2650 supercharger on your Dodge Ram can dramatically enhance its performance, delivering over 180 additional horsepower. By following this guide, you can ensure a successful installation and enjoy the thrilling benefits of your upgraded vehicle. Always remember to perform regular maintenance to keep your supercharger running smoothly for years to come.