Table of Contents
The Toyota 4Runner TRD Pro is a popular choice among off-road enthusiasts, and lifting it can enhance its capabilities significantly. However, with a lift comes the important consideration of tire compatibility. This article will explore how to safely fit 33×10.50, 35×12.50, and 37×13.50 tires after a lift on your 4Runner TRD Pro.
Understanding Tire Sizes
Tire sizes can be confusing, but understanding the numbers can help you make informed decisions. The first number represents the tire’s width in millimeters, while the second number is the aspect ratio, indicating the height of the tire’s sidewall as a percentage of the width. For example, a 33×10.50 tire is 33 inches in diameter and 10.5 inches wide.
Factors Influencing Tire Fitment
Several factors affect tire fitment on a lifted 4Runner TRD Pro:
- Lift Height
- Wheel Offset
- Fender Clearance
- Suspension Geometry
Lifting Your 4Runner
A proper lift can provide the necessary clearance for larger tires. Most 4Runner TRD Pro lifts offer around 2 to 3 inches of height, which can accommodate larger tires without significant modifications.
Fitting 33×10.50 Tires
33×10.50 tires are a great option for those looking for a balance between off-road capability and on-road comfort. With a lift, these tires can fit comfortably without major modifications.
Installation Tips
When installing 33×10.50 tires, consider the following:
- Check for rubbing during full steering lock.
- Ensure proper alignment after installation.
- Monitor tire pressure regularly.
Fitting 35×12.50 Tires
35×12.50 tires offer increased off-road capability and a more aggressive stance. However, they may require additional modifications, such as trimming or adjusting the fenders.
Installation Considerations
Before fitting 35×12.50 tires, keep these considerations in mind:
- Inspect wheel offset to prevent rubbing.
- Consider installing extended fender flares.
- Test articulation to ensure clearance during off-road use.
Fitting 37×13.50 Tires
37×13.50 tires are the largest option for the 4Runner TRD Pro, providing maximum off-road performance. However, fitting these tires typically requires significant modifications.
Modification Requirements
To safely fit 37×13.50 tires, consider the following modifications:
- Install a high-clearance lift kit.
- Modify or replace the front bumper.
- Adjust the rear suspension for better articulation.
Conclusion
Choosing the right tire size after lifting your 4Runner TRD Pro is crucial for both performance and safety. Whether you opt for 33×10.50, 35×12.50, or 37×13.50 tires, ensure that you consider the necessary modifications and installation tips for a successful fit.
Always consult with a professional if you’re unsure about the compatibility of your tires and lift setup. With the right approach, your lifted 4Runner can navigate any terrain with confidence.