Troubleshooting Common Issues with the Turboxs Race Series Wrx Exhaust System

by

The TurboXS Race Series WRX Exhaust System is a popular choice among car enthusiasts looking to enhance their vehicle’s performance and sound. However, like any aftermarket modification, users may encounter common issues. This article aims to address these problems and provide solutions to ensure optimal performance.

Common Issues with the TurboXS Race Series WRX Exhaust System

  • Exhaust Leaks
  • Excessive Noise
  • Fitment Problems
  • Check Engine Light Activation
  • Performance Issues

Troubleshooting Exhaust Leaks

Exhaust leaks can lead to a decrease in performance and an increase in noise. Here are steps to troubleshoot and fix leaks:

  • Inspect Connections: Check all connection points between the exhaust components. Ensure that clamps are tight and there are no visible gaps.
  • Use a Smoke Test: A smoke test can help identify leaks. Introduce smoke into the exhaust system and observe where it escapes.
  • Check for Rust or Damage: Inspect the exhaust pipes for any signs of rust or physical damage that may cause leaks.
  • Sealant Application: If leaks are found, consider using high-temperature exhaust sealant on the joints.

Addressing Excessive Noise

While an aggressive sound is expected from a performance exhaust, excessive noise can be a concern. Here’s how to address it:

  • Check Muffler Condition: Inspect the muffler for damage or internal failure, which can cause unwanted noise.
  • Verify Installation: Ensure that the exhaust system is installed correctly. Misalignment can lead to rattling and increased noise levels.
  • Consider Resonators: If noise is too loud, adding resonators can help reduce sound levels while maintaining performance.
  • Use Sound Deadening Materials: Applying sound deadening materials around the exhaust system can help absorb excessive noise.

Fixing Fitment Problems

Fitment issues may arise during installation, affecting performance and sound. Here are troubleshooting tips:

  • Recheck Compatibility: Ensure that the exhaust system is specifically designed for your WRX model and year.
  • Align Components: During installation, make sure all components are properly aligned before tightening any bolts.
  • Adjust Hangers: If the exhaust hangs too low or high, adjust the hangers to achieve a proper fit.
  • Consult Installation Manual: Refer to the installation manual for specific fitment guidelines and adjustments.

Resolving Check Engine Light Activation

Sometimes, installing an aftermarket exhaust can trigger the check engine light (CEL). Here’s how to troubleshoot this issue:

  • Check O2 Sensor Placement: Ensure that O2 sensors are correctly placed and not damaged during installation.
  • Use a Tune: Consider tuning the vehicle’s ECU to accommodate the new exhaust system, which can help eliminate CEL triggers.
  • Inspect for Leaks: Exhaust leaks can also cause CEL issues; ensure there are no leaks in the system.
  • Scan for Codes: Use an OBD-II scanner to read the error codes and address any specific issues indicated.

Tackling Performance Issues

Performance problems can stem from various factors after installing the TurboXS exhaust. Here’s how to troubleshoot:

  • Evaluate Airflow: Ensure that the exhaust system is not obstructing airflow; check for kinks or bends in the piping.
  • Check for Backpressure: Too much backpressure can hinder performance; ensure the exhaust system is designed for optimal flow.
  • Inspect for Leaks: As mentioned earlier, leaks can lead to performance drops; ensure the system is sealed properly.
  • Consider Upgrades: If performance issues persist, consider upgrading other components, such as the intake or tuning the ECU.

Conclusion

Troubleshooting common issues with the TurboXS Race Series WRX Exhaust System can help maintain performance and enhance your driving experience. By following the steps outlined in this article, users can identify and resolve problems effectively, ensuring their exhaust system performs at its best.