Turbocharger Guide Installation Basics: Installing a Garrett Gtx3576r in Your Subaru Wrx

by

Installing a turbocharger can significantly enhance the performance of your vehicle. In this guide, we will cover the basic steps for installing a Garrett GTX3576R turbocharger in a Subaru WRX. This process requires mechanical knowledge and the right tools, so ensure you are prepared before starting.

Tools and Materials Needed

  • Garrett GTX3576R Turbocharger
  • Turbocharger installation kit
  • Socket and wrench set
  • Torque wrench
  • Intercooler piping
  • Oil feed and drain lines
  • Boost gauge
  • Vacuum lines
  • Coolant hoses
  • Basic hand tools

Preparation Steps

Before beginning the installation, it is essential to prepare your workspace and vehicle. Follow these steps to ensure a smooth process:

  • Park your Subaru WRX on a flat surface and engage the parking brake.
  • Disconnect the battery to prevent electrical issues.
  • Remove any parts obstructing access to the turbocharger area, including the intake manifold and exhaust components.
  • Drain the coolant and oil to avoid spills during installation.

Removing the Stock Turbocharger

To install the Garrett GTX3576R, you must first remove the stock turbocharger. Follow these steps:

  • Unbolt the exhaust downpipe from the stock turbocharger.
  • Disconnect the oil feed line and oil drain line from the stock turbo.
  • Remove the intake piping connected to the stock turbocharger.
  • Unbolt the stock turbocharger from the manifold and carefully remove it from the engine bay.

Installing the Garrett GTX3576R Turbocharger

With the stock turbocharger removed, you can now proceed to install the Garrett GTX3576R. Follow these steps:

  • Position the Garrett GTX3576R turbocharger onto the manifold.
  • Secure the turbocharger using the provided bolts and torque them to the manufacturer’s specifications.
  • Reconnect the oil feed line and oil drain line, ensuring there are no leaks.
  • Install the intake piping, ensuring a secure fit to prevent boost leaks.
  • Connect the exhaust downpipe to the turbocharger and tighten the bolts.

Connecting Additional Components

After securing the turbocharger, you need to connect additional components for optimal performance:

  • Install the intercooler piping and ensure it is properly secured.
  • Connect the boost gauge to monitor the turbo pressure.
  • Reconnect any vacuum lines that were disconnected during the process.
  • Reinstall any coolant hoses that were removed earlier.

Final Checks and Start-Up

Before starting your vehicle, perform the following final checks:

  • Double-check all connections for tightness and leaks.
  • Refill the engine with oil and coolant.
  • Reconnect the battery.
  • Start the engine and let it idle while checking for any unusual sounds or leaks.

Conclusion

Installing a Garrett GTX3576R turbocharger in your Subaru WRX can enhance performance significantly. By following these installation basics, you can ensure a successful upgrade. Always remember to consult your vehicle’s manual and consider professional assistance if needed.