Upgrading to a 28-inch Turboxs Wrx Front Mount Intercooler: Installation Tips and Power Gains

by

Upgrading your WRX with a 28-inch TurboXS front mount intercooler can significantly enhance performance and power delivery. This article provides essential installation tips and insights into the power gains you can expect from this upgrade.

Why Upgrade to a Front Mount Intercooler?

Front mount intercoolers (FMIC) are designed to improve the efficiency of your vehicle’s turbocharging system. By allowing cooler air to enter the engine, you can achieve better combustion and higher power output. Here are some reasons to consider this upgrade:

  • Improved airflow for better performance.
  • Lower intake temperatures leading to increased horsepower.
  • Enhanced throttle response.
  • Better engine reliability under high-performance conditions.

Installation Tips for the TurboXS WRX Front Mount Intercooler

Installing a front mount intercooler requires careful planning and execution. Below are some essential tips to ensure a successful installation:

Gather Necessary Tools and Parts

Before starting the installation, make sure you have all the required tools and parts. Here’s a basic list:

  • Socket set
  • Wrenches
  • Torque wrench
  • Intercooler piping kit
  • Silicone couplers
  • Zip ties
  • Coolant (if applicable)

Prepare Your Vehicle

Ensure your vehicle is parked on a flat surface and the engine is cool before beginning the installation. Disconnect the battery to avoid any electrical issues during the process.

Remove the Stock Intercooler

To install the TurboXS intercooler, you must first remove the stock intercooler. Follow these steps:

  • Loosen and remove the clamps on the stock intercooler piping.
  • Disconnect any sensors or hoses attached to the intercooler.
  • Remove the intercooler from its mounting points.

Install the TurboXS Front Mount Intercooler

Once the stock intercooler is removed, you can install the new TurboXS front mount intercooler:

  • Position the intercooler in place and secure it with the provided mounting hardware.
  • Connect the intercooler piping, ensuring all connections are tight and secure.
  • Attach silicone couplers to eliminate any potential leaks.

Reconnect All Components

After securing the intercooler, reconnect any sensors, hoses, and the battery. Make sure everything is in its proper place to avoid issues during operation.

Expected Power Gains

One of the main reasons to upgrade to a TurboXS front mount intercooler is the potential power gains. Here’s what you can expect:

  • Typically, users report gains of 20-30 horsepower.
  • Improved torque delivery, especially in the mid-range RPMs.
  • Enhanced performance during high-boost scenarios.

Conclusion

Upgrading to a 28-inch TurboXS WRX front mount intercooler is a worthwhile investment for any WRX owner looking to improve performance. With careful installation and attention to detail, you can enjoy significant power gains and a more responsive driving experience.