Table of Contents
The Mitsubishi Eclipse GSX is a beloved platform among car enthusiasts, particularly those who appreciate tuning and performance upgrades. One of the most impactful modifications you can make to this vehicle is upgrading to a Garrett GT35 turbocharger. This article will guide you through the installation steps and discuss the power potential of this upgrade.
Understanding the Garrett GT35 Turbocharger
The Garrett GT35 turbocharger is known for its efficiency and ability to produce significant horsepower gains. With a larger compressor wheel and a robust turbine design, it can support a wide range of horsepower outputs, making it an ideal choice for the Eclipse GSX.
Installation Steps for the Garrett GT35 Turbo
Required Tools and Materials
- Garrett GT35 Turbocharger
- Turbo manifold
- Oil feed and drain lines
- Intercooler piping
- Wastegate
- Boost controller
- Basic hand tools (sockets, wrenches, etc.)
- Torque wrench
- Gaskets and seals
Step 1: Prepare Your Workspace
Before starting the installation, ensure you have a clean and organized workspace. This will help prevent any parts from getting lost and make the process smoother.
Step 2: Remove the Stock Turbocharger
Begin by disconnecting the battery. Next, remove the intake and exhaust components connected to the stock turbocharger. This includes the downpipe, intercooler pipes, and any associated wiring. Carefully detach the oil feed and drain lines as well.
Step 3: Install the Turbo Manifold
Once the stock turbo is removed, install the new turbo manifold. Ensure that you use new gaskets and torque the bolts to the manufacturer’s specifications. This will prevent exhaust leaks and ensure optimal performance.
Step 4: Mount the Garrett GT35 Turbo
Carefully mount the Garrett GT35 turbocharger onto the new manifold. Secure it with the appropriate hardware and ensure it is tightly fastened. Double-check the alignment to avoid any issues during operation.
Step 5: Connect Oil Feed and Drain Lines
Next, connect the oil feed and drain lines to the turbocharger. Make sure to use high-quality seals to prevent oil leaks, which can lead to turbo failure.
Step 6: Install Intercooler Piping
Install the intercooler piping, ensuring that all connections are tight and secure. This is crucial for maintaining boost pressure and preventing leaks.
Step 7: Set Up the Wastegate and Boost Controller
Install the wastegate and connect it to the turbocharger. Additionally, set up your boost controller to manage the boost levels effectively. This will help you achieve the desired power output safely.
Step 8: Reconnect Battery and Start the Engine
Reconnect the battery and start the engine. Allow it to idle for a few minutes, checking for any leaks or unusual noises. Once you are satisfied that everything is functioning correctly, take the car for a test drive.
Power Potential of the Garrett GT35 Turbo
Upgrading to a Garrett GT35 turbocharger can significantly increase the power output of your Eclipse GSX. Depending on your supporting modifications and tuning, you can expect to achieve:
- 400 to 600 horsepower on a well-tuned setup
- Improved throttle response
- Higher boost levels without compromising reliability
Conclusion
Installing a Garrett GT35 turbocharger on your Mitsubishi Eclipse GSX can unlock a world of performance potential. By following the steps outlined in this article and ensuring proper tuning, you can enjoy a thrilling driving experience with substantial power gains.