Upgrading to a Precision 5857 Turbo on Your Civic Si: Installation and Tuning Insights

by

Upgrading to a Precision 5857 Turbo on your Civic Si can significantly enhance performance, providing a boost in power and efficiency. This article will guide you through the installation process and offer insights into tuning for optimal performance.

Understanding the Precision 5857 Turbo

The Precision 5857 Turbo is known for its reliability and efficiency. It is designed to deliver quick spool times and high power output, making it a popular choice among Civic Si enthusiasts. Here are some key specifications:

  • Compressor Wheel: 57mm
  • Turbine Wheel: 76mm
  • Max Horsepower: 500+
  • Optimal Boost Range: 15-30 PSI

Preparation for Installation

Before starting the installation, ensure you have all necessary tools and parts. A well-prepared workspace will make the process smoother. Here’s a checklist of what you’ll need:

  • Precision 5857 Turbo Kit
  • Turbo manifold
  • Intercooler and piping
  • Oil feed and return lines
  • Boost controller
  • ECU tuning software
  • Basic hand tools (sockets, wrenches, etc.)

Installation Process

Step 1: Remove the Stock Turbo

Begin by safely lifting your Civic Si and securing it on jack stands. Remove the stock turbo by following these steps:

  • Disconnect the battery.
  • Remove the intake system.
  • Drain the coolant and oil.
  • Unbolt the stock turbo from the manifold.
  • Disconnect oil and coolant lines.

Step 2: Install the Precision 5857 Turbo

With the stock turbo removed, it’s time to install the Precision 5857 Turbo. Follow these steps:

  • Install the new turbo onto the manifold.
  • Connect the oil feed and return lines.
  • Attach the coolant lines.
  • Secure the turbo with bolts.
  • Reinstall the intake system.

Step 3: Install the Intercooler and Piping

The intercooler is crucial for maintaining optimal temperatures. Here’s how to install it:

  • Mount the intercooler in the front of the vehicle.
  • Connect the piping from the turbo to the intercooler.
  • Ensure all connections are tight and secure.

Step 4: Final Checks

Before starting the engine, perform a final inspection:

  • Check all fluid levels.
  • Ensure all bolts and connections are secure.
  • Reconnect the battery.

Tuning Your Civic Si

Tuning is essential to maximize the performance of your new turbo. Here are some important considerations:

  • Use a reputable ECU tuning software.
  • Adjust fuel maps to accommodate the increased airflow.
  • Monitor air-fuel ratios to avoid lean conditions.
  • Consider a dyno tune for precise adjustments.

Common Issues and Troubleshooting

After installation and tuning, you may encounter some common issues. Here’s how to troubleshoot:

  • Boost leaks: Check all connections and hoses for leaks.
  • Oil leaks: Inspect oil lines and fittings for secure connections.
  • Check engine light: Use an OBD-II scanner to diagnose error codes.

Conclusion

Upgrading to a Precision 5857 Turbo can transform your Civic Si into a high-performance machine. With careful installation and proper tuning, you’ll enjoy a significant boost in power and driving experience. Always remember to monitor your vehicle’s performance and make adjustments as necessary to keep everything running smoothly.