Table of Contents
The Veloster N is known for its sporty performance and thrilling driving experience. Upgrading to the Aerocharger Pro 700 Turbo can significantly enhance your vehicle’s power and responsiveness. In this article, we will explore the installation tips and the potential power gains you can achieve with this turbo upgrade.
Understanding the Aerocharger Pro 700 Turbo
The Aerocharger Pro 700 Turbo is designed to provide increased airflow and boost pressure, resulting in improved engine performance. With a larger compressor wheel and advanced turbine design, this turbocharger can help unleash the full potential of your Veloster N’s engine.
- Increased horsepower and torque
- Improved throttle response
- Enhanced driving experience
Installation Preparation
Before starting the installation process, it is essential to gather all necessary tools and components. Proper preparation can make the installation smoother and more efficient.
- Basic hand tools (wrenches, sockets, screwdrivers)
- Torque wrench
- New gaskets and seals
- Oil and coolant for refilling
- Safety glasses and gloves
Step-by-Step Installation Guide
1. Remove the Existing Turbocharger
Start by disconnecting the battery to ensure safety. Next, remove the intake and exhaust components connected to the stock turbocharger. This may include:
- Intake piping
- Downpipe
- Wastegate actuator
Once everything is disconnected, unbolt the stock turbocharger from the manifold and carefully remove it from the engine bay.
2. Prepare the New Turbocharger
Before installing the Aerocharger Pro 700 Turbo, ensure that all gaskets and seals are in good condition. It’s recommended to replace any worn or damaged components to prevent leaks.
3. Install the Aerocharger Pro 700 Turbo
Position the new turbocharger onto the manifold and secure it in place with the provided bolts. Ensure that the turbo is aligned correctly and that all mounting points are tight.
4. Reconnect All Components
Reconnect the intake piping, downpipe, and wastegate actuator. Make sure all connections are secure and that there are no loose fittings.
5. Check Fluid Levels
Before starting the engine, check the oil and coolant levels. Top off any fluids as necessary to ensure optimal performance and prevent overheating.
6. Start the Engine
Reconnect the battery and start the engine. Allow it to idle for a few minutes while checking for any leaks or unusual noises. If everything appears normal, take the vehicle for a test drive to experience the improved performance.
Potential Power Gains
Upgrading to the Aerocharger Pro 700 Turbo can yield impressive power gains. Depending on your vehicle’s current setup and tuning, you can expect:
- Horsepower increase of 50-100 hp
- Torque boost of 60-80 lb-ft
- Improved 0-60 mph times
Tuning and Adjustments
To fully realize the benefits of the Aerocharger Pro 700 Turbo, proper tuning is essential. A professional tune can optimize fuel maps and boost levels, ensuring your engine runs efficiently and safely.
Considerations for Tuning
When tuning your vehicle after the turbo upgrade, keep the following in mind:
- Use high-quality fuel to prevent detonation
- Monitor air-fuel ratios
- Adjust timing for optimal performance
Conclusion
Upgrading to the Aerocharger Pro 700 Turbo on your Veloster N can provide substantial power gains and enhance your driving experience. By following the installation tips outlined in this article and ensuring proper tuning, you can enjoy the full benefits of this performance upgrade.