Table of Contents
The Audi RS3 is known for its impressive performance and engineering, but for enthusiasts looking to push the limits, upgrading the turbocharger can unlock even more potential. The Precision Turbo 5857 Gen2 is a popular choice among RS3 owners aiming for significant power gains. This article will guide you through the installation process and the power results achieved after the upgrade.
Why Upgrade to the Precision Turbo 5857 Gen2?
The Precision Turbo 5857 Gen2 offers several advantages over the stock turbocharger. Here are some reasons why you might consider this upgrade:
- Increased Power Output: The 5857 Gen2 can support higher horsepower levels, making it ideal for those seeking maximum performance.
- Improved Efficiency: This turbocharger is designed to provide better airflow and quicker spool times.
- Durability: Precision Turbo products are known for their robust construction, ensuring longevity under high-performance conditions.
Preparation for Installation
Before diving into the installation process, it’s essential to gather all necessary tools and components. Here’s a checklist to ensure a smooth upgrade:
- Precision Turbo 5857 Gen2 Turbocharger
- Turbocharger installation kit
- Basic hand tools (sockets, wrenches, pliers)
- Torque wrench
- Coolant and oil
- New gaskets and seals
- Access to a lift or jack stands
Installation Process
Step 1: Remove the Stock Turbocharger
Start by disconnecting the battery to ensure safety during the installation. Then, follow these steps to remove the stock turbo:
- Remove the engine cover.
- Disconnect the intake piping and turbo inlet.
- Remove the exhaust manifold bolts and detach the turbo from the manifold.
- Disconnect the oil and coolant lines.
- Carefully remove the stock turbocharger from the engine bay.
Step 2: Install the Precision Turbo 5857 Gen2
With the stock turbo removed, it’s time to install the new Precision Turbo:
- Position the new turbocharger in place and secure it to the exhaust manifold.
- Reconnect the oil and coolant lines, ensuring all fittings are tight.
- Install new gaskets and seals to prevent leaks.
- Reattach the intake piping and turbo inlet.
- Double-check all connections for security.
Step 3: Reconnect the Battery and Test
Once everything is securely in place, reconnect the battery. Start the engine and allow it to idle for a few minutes. Check for any leaks and ensure that all systems are functioning correctly.
Power Results After Installation
After the installation of the Precision Turbo 5857 Gen2, many RS3 owners report impressive power gains. Here’s what you can expect:
- Horsepower Increase: Many users have experienced increases of 100+ horsepower compared to the stock turbo.
- Torque Gains: Torque figures can also see significant improvements, enhancing overall performance.
- Improved Throttle Response: The new turbocharger often results in quicker throttle response and better drivability.
Conclusion
Upgrading to the Precision Turbo 5857 Gen2 on the Audi RS3 is a worthwhile investment for those looking to enhance their vehicle’s performance. With careful installation and attention to detail, the results can be remarkable, providing a thrilling driving experience. Always ensure to monitor your vehicle’s performance post-installation and consider professional tuning to maximize the benefits of your new turbocharger.