Table of Contents
Installing a turbo kit on your Wrangler can significantly enhance its performance, allowing for greater horsepower and torque. This guide will walk you through the installation of the Garrett GT2056V turbocharger, designed to help your vehicle achieve up to 350 HP.
Tools and Materials Needed
- Garrett GT2056V Turbocharger
- Turbo mounting hardware
- Exhaust manifold
- Oil feed and return lines
- Intercooler and piping
- Air filter
- Boost controller
- Basic hand tools (wrenches, sockets, etc.)
- Torque wrench
- Vehicle lift or jack stands
Preparation Steps
Before starting the installation, ensure that you have all the necessary tools and materials. It’s also critical to work in a well-ventilated area, as you’ll be working with exhaust components and potentially harmful fumes.
1. Safety First
Wear safety glasses and gloves during the installation. Make sure the vehicle is securely lifted and stable before working underneath it.
2. Disconnect the Battery
Disconnect the negative terminal of the battery to prevent any electrical issues during the installation process.
Removing the Stock Components
To install the Garrett GT2056V, you’ll need to remove several stock components from your Wrangler.
1. Remove the Air Intake
Start by removing the air intake system. Disconnect any sensors and hoses attached to it, and then unbolt it from the engine.
2. Remove the Exhaust Manifold
Next, unbolt the exhaust manifold. Be cautious of hot components and ensure the engine is cool before touching these parts.
Installing the Garrett GT2056V Turbocharger
Now that the stock components are removed, you can proceed with the turbo installation.
1. Mount the Turbocharger
Position the Garrett GT2056V turbocharger onto the exhaust manifold. Use the provided hardware to secure it in place, ensuring a tight fit.
2. Connect Oil Lines
Attach the oil feed and return lines to the turbocharger. Ensure that all connections are secure to prevent any oil leaks.
3. Install the Intercooler and Piping
Install the intercooler and connect the piping from the turbo to the intercooler and then to the intake manifold. Make sure all clamps are tightened properly.
Final Steps
With the turbocharger installed, you can now reassemble any components that were removed during the process.
1. Reinstall the Air Intake
Reattach the air intake system, making sure to connect all sensors and hoses securely.
2. Reconnect the Battery
Reconnect the negative terminal of the battery. Ensure that all tools and materials are cleared from the engine bay.
Testing Your Installation
Once everything is reassembled, it’s time to test your installation. Start the engine and check for any leaks or unusual noises.
1. Check for Leaks
Inspect the oil and coolant lines for any leaks. Address any issues before taking the vehicle on the road.
2. Test Drive
Take your Wrangler for a test drive to ensure that the turbo is functioning correctly. Monitor the boost levels and performance during the drive.
Conclusion
Installing the Garrett GT2056V turbocharger can dramatically improve your Wrangler’s performance. Following this guide will help ensure a successful installation, allowing you to enjoy the increased horsepower and torque.