Wrx Intercooler Upgrade: Installing a Turbosmart 19x Series for Increased Boost and Reliability

by

The Subaru WRX is known for its performance and tuning potential. One of the most effective upgrades you can make to enhance your WRX’s performance is installing a high-quality intercooler. In this article, we will focus on the Turbosmart 19X Series intercooler, which is designed to increase boost and reliability for your WRX.

Why Upgrade Your Intercooler?

Upgrading your intercooler can significantly improve your vehicle’s performance. Here are some reasons why you should consider it:

  • Improved Cooling Efficiency: A larger intercooler can dissipate heat more effectively, leading to cooler intake temperatures.
  • Increased Power Output: Cooler air is denser, allowing for more oxygen in the combustion chamber, which translates to more power.
  • Enhanced Reliability: Lower intake temperatures reduce the risk of engine knock and other heat-related issues.
  • Better Performance Under Load: A high-performance intercooler can maintain optimal temperatures during demanding driving conditions.

Introducing the Turbosmart 19X Series Intercooler

The Turbosmart 19X Series intercooler is engineered for performance enthusiasts looking to maximize their WRX’s potential. Here are some key features:

  • High-Flow End Tanks: Designed to minimize turbulence and maximize airflow.
  • Lightweight Construction: Made from high-quality materials that reduce overall weight without compromising strength.
  • Direct Fit: Specifically designed for WRX models, ensuring an easy installation process.
  • Increased Core Size: Provides a larger surface area for heat dissipation.

Tools and Materials Needed

Before you start the installation, gather the following tools and materials:

  • Socket set
  • Wrenches
  • Flathead screwdriver
  • Phillips screwdriver
  • Torque wrench
  • New intercooler mounting hardware (if necessary)
  • Coolant (if applicable)
  • Shop towels

Step-by-Step Installation Guide

Step 1: Prepare Your Vehicle

Before beginning the installation, ensure your vehicle is parked on a flat surface and the engine is cool. Disconnect the battery to prevent any electrical issues during the process.

Step 2: Remove the Stock Intercooler

To remove the stock intercooler, follow these steps:

  • Locate the stock intercooler in the engine bay.
  • Disconnect the hoses connected to the intercooler using a flathead screwdriver.
  • Unbolt the intercooler from its mounting points using a socket set.
  • Carefully lift the intercooler out of the engine bay.

Step 3: Install the Turbosmart 19X Series Intercooler

Now it’s time to install the new intercooler:

  • Position the Turbosmart intercooler in the same location as the stock unit.
  • Secure the intercooler using the provided mounting hardware.
  • Reconnect the hoses to the intercooler, ensuring a tight fit.
  • Double-check all connections and fittings.

Step 4: Reconnect the Battery and Test

After the intercooler is installed, reconnect the battery. Start the engine and let it idle for a few minutes. Check for any leaks or unusual noises. Take the vehicle for a test drive to ensure everything is functioning properly.

Conclusion

Upgrading to the Turbosmart 19X Series intercooler is a fantastic way to enhance the performance and reliability of your WRX. With improved cooling efficiency and increased power output, this intercooler is a worthy investment for any enthusiast. Follow the installation guide carefully, and enjoy the benefits of your new intercooler!