Table of Contents
The BMW M Performance Exhaust system is a popular upgrade for the F87 M2, enhancing both performance and sound. This step-by-step guide will help you install the exhaust system efficiently and safely.
Tools and Materials Needed
- BMW M Performance Exhaust Kit
- Ratchet and Socket Set
- Torque Wrench
- Jack and Jack Stands
- Safety Glasses
- Gloves
- Cutting Tool (if necessary)
- Lubricant (for exhaust hangers)
Preparation Steps
Before starting the installation, ensure that you have all tools and materials ready. Follow these preparation steps:
- Park your BMW M2 on a flat surface.
- Engage the parking brake.
- Disconnect the battery to avoid any electrical issues.
- Raise the vehicle using a jack and secure it with jack stands.
Removing the Stock Exhaust
Follow these steps to remove the stock exhaust system:
- Locate the bolts holding the exhaust to the catalytic converter and the rear section.
- Using a ratchet and appropriate socket, remove the bolts.
- Detach the exhaust hangers with a lubricant if necessary.
- Carefully lower the stock exhaust from the vehicle.
Installing the BMW M Performance Exhaust
Now it’s time to install the new exhaust system:
- Position the new exhaust system under the vehicle.
- Align the exhaust with the catalytic converter and the exhaust tips.
- Insert the exhaust hangers into their respective mounts.
- Secure the exhaust to the catalytic converter using the provided bolts.
- Ensure all connections are tight but do not overtighten.
Final Checks and Reconnection
After installation, perform the following checks:
- Check all bolts and connections to ensure they are secure.
- Reconnect the battery.
- Start the engine and listen for any unusual noises.
- Check for leaks around the exhaust joints.
Conclusion
Installing the BMW M Performance Exhaust on your F87 M2 can significantly enhance your driving experience. By following this step-by-step guide, you can ensure a successful installation and enjoy the improved performance and sound of your vehicle.