Step-by-step: Installing Precision Turbo Fuel Injectors (650cc) on a Chevy Ls Swap

by

Installing Precision Turbo Fuel Injectors (650cc) on a Chevy LS swap can significantly enhance the performance of your engine. This guide will walk you through the process step-by-step, ensuring a successful installation.

Tools and Materials Needed

  • Precision Turbo Fuel Injectors (650cc)
  • Socket set
  • Torque wrench
  • Fuel line disconnect tool
  • Shop towels
  • Engine oil
  • Safety glasses
  • Gloves

Preparation Steps

Before starting the installation, ensure you have all the necessary tools and materials. Additionally, follow these preparation steps:

  • Disconnect the battery to prevent any electrical issues.
  • Relieve the fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls.
  • Gather all the tools and materials in a clean workspace.

Removing the Old Fuel Injectors

To install the new Precision Turbo Fuel Injectors, you must first remove the old injectors. Follow these steps:

  • Locate the fuel rail on the intake manifold.
  • Disconnect the fuel lines using the fuel line disconnect tool.
  • Unplug the wiring harness from each injector.
  • Remove the bolts securing the fuel rail to the intake manifold.
  • Carefully lift the fuel rail and remove the old injectors.

Preparing the New Injectors

Before installing the new injectors, it’s essential to prepare them properly:

  • Apply a small amount of engine oil to the O-rings of the new injectors to ensure a proper seal.
  • Check the injector connectors to ensure they are clean and free of debris.

Installing the New Precision Turbo Fuel Injectors

Now that the old injectors are removed and the new ones are prepared, follow these steps to install the new injectors:

  • Insert each new injector into the fuel rail, ensuring they are seated properly.
  • Align the fuel rail with the intake manifold and secure it using the bolts you removed earlier.
  • Reconnect the wiring harness to each injector.
  • Reconnect the fuel lines to the fuel rail.

Final Steps

After installing the new injectors, complete the following final steps:

  • Reconnect the battery.
  • Turn the ignition key to the “on” position for a few seconds to prime the fuel system.
  • Check for any fuel leaks around the injectors and fuel rail.
  • Start the engine and let it idle for a few minutes, checking for smooth operation.

Troubleshooting Common Issues

If you encounter any issues after installation, consider the following troubleshooting tips:

  • If the engine runs rough, check the injector connections and ensure they are secure.
  • Look for any fuel leaks around the injectors and fuel rail.
  • If the engine will not start, verify that the fuel pump is functioning correctly.

Conclusion

Installing Precision Turbo Fuel Injectors (650cc) on a Chevy LS swap can enhance your engine’s performance significantly. By following these steps carefully, you can ensure a successful installation. Always remember to take safety precautions and consult with a professional if you encounter any issues.